Daily Papers

Alignment tuning is meant to make harmful-request refusal robust, yet this safety behavior can be erased by a small set of benign fine-tuning examples. This is a deployment risk for open-weight models because a checkpoint can pass refusal tests at release time and later lose refusal under low-cost downstream fine-tuning. Prior work has established these refusal failures, but existing studies do not show how to detect this fragility in the aligned model itself before an attack or fine-tuning intervention is run. We introduce Skin-Deep, a geometric diagnostic that detects alignment fragility directly from the aligned model's hidden-state activations before such an intervention is run and compresses the layer-wise safety geometry into a single scalar, the Geometric Fragility Score (GFS). Applied to twenty-one instruction-tuned models spanning six alignment recipes and 3B--32B parameters, Skin-Deep reveals a recurring low-rank safety subspace across model families. Direction ablations show that removing directions in this subspace weakens harmful-request refusal, providing causal evidence that the recovered geometry underlies refusal behavior. Crucially, GFS identifies, before any fine-tuning, the initially safe model that retains the most refusal after small-scale LoRA fine-tuning. These results establish GFS as a practical pre-deployment diagnostic for flagging fragile refusal behavior without running an attack.

Reinforcement learning is structurally harder than supervised learning because the policy changes the data distribution it learns from. The resulting fragility is especially visible in large-model training, where the training and rollout systems differ in numerical precision, sampling, and other implementation details. Existing methods manage this fragility by adding hyper-parameters to the training objective, which makes the algorithm more sensitive to its configuration and requires retuning whenever the task, model scale, or distribution mismatch changes. This fragility traces to two concerns that current objectives entangle through hyper-parameters set before training begins: a trust-region concern, that updates should not move the policy too far from its current value, and an off-policy concern, that data from older or different behavior policies should influence the update only to the extent that it remains reliable. Neither concern is a constant to set in advance, and their severity is reflected in the policy-ratio distribution of the current batch. We present a simple yet effective batch-adaptive objective that replaces fixed clipping with the normalized effective sample size of the policy ratios. The same statistic caps the score-function weight and sets the strength of an off-policy regularizer, so the update stays close to the usual on-policy score-function update when ratios are nearly uniform, and tightens automatically when stale or mismatched data cause ratio concentration, while retaining a nonzero learning signal on high-ratio tokens. Experiments across a wide range of settings show that our method matches or exceeds tuned baselines, introducing no new objective hyper-parameters and removing several existing ones. The code is available at https://github.com/FeynRL-project/FeynRL.

PGD adversarial training, the standard robustness method, can reduce Jacobian Frobenius norm yet worsen clean-input geometry (e.g., TDI 1.336 vs. ERM 1.093). We show this is not an implementation artifact but a theorem-level consequence of supervised learning. We prove that any encoder minimizing supervised loss must retain non-zero sensitivity along directions correlated with training labels, including directions that are nuisance at test time. This holds across proper scoring rules, architectures, and dataset sizes. We call this the geometric blind spot of supervised learning. This theorem unifies four empirical phenomena often treated separately: non-robust features, texture bias, corruption fragility, and the robustness-accuracy tradeoff. It also explains why suppressing sensitivity in one adversarial direction can redistribute sensitivity elsewhere. We introduce Trajectory Deviation Index (TDI), a diagnostic of geometric isotropy. Unlike CKA, intrinsic dimension, or Jacobian Frobenius norm alone, TDI captures the failure mode above. In our experiments, PGD attains low Frobenius norm but high TDI, while PMH attains the lowest TDI with one additional training term and no architectural changes. Across seven tasks, BERT/SST-2, and ImageNet ViT-B/16 (backbone family underlying CLIP/DINO/SAM), the blind spot is measurable and repairable. It appears at foundation-model scale, worsens with model scale and task-specific fine-tuning, and is substantially reduced by PMH. PMH also leads on non-Gaussian corruption types (blur/brightness/contrast) without corruption-specific training.

Recent advances in reinforcement learning (RL) have led to substantial improvements in the mathematical reasoning abilities of LLMs, as measured by standard benchmarks. Yet these gains often persist even when models are trained with flawed signals, such as random or inverted rewards. This raises a fundamental question: do such improvements reflect genuine reasoning, or are they merely artifacts of overfitting to benchmark-specific patterns? To answer this question, we adopt an evaluation-centric perspective and highlight two critical shortcomings in existing protocols. First, benchmark contamination arises because test problems are publicly available, thereby increasing the risk of data leakage. Second, evaluation fragility results from reliance on single-instance assessments, which are sensitive to stochastic outputs and fail to capture reasoning consistency. These limitations suggest the need for a new evaluation paradigm that can probe reasoning ability beyond memorization and one-off success. As response, we propose VAR-MATH, a symbolic evaluation framework that converts fixed numerical problems into parameterized templates and requires models to solve multiple instantiations of each. This design enforces consistency across structurally equivalent variants, mitigates contamination, and enhances robustness through bootstrapped metrics. We apply VAR-MATH to transform three popular benchmarks, AMC23, AIME24, and AIME25, into their symbolic counterparts, VAR-AMC23, VAR-AIME24, and VAR-AIME25. Experimental results show substantial performance drops for RL-trained models on these variabilized benchmarks, especially for smaller models, with average declines of 47.9\% on AMC23, 58.8\% on AIME24, and 72.9\% on AIME25. These findings indicate that some existing RL methods rely on superficial heuristics and fail to generalize beyond specific numerical forms.

Reliable deployment of language models requires two capabilities that appear distinct but share a common geometric foundation: predicting whether a model will accept targeted behavioral control, and detecting when its internal structure degrades. We show that geometric stability, the consistency of a representation's pairwise distance structure, addresses both. Supervised Shesha variants that measure task-aligned geometric stability predict linear steerability with near-perfect accuracy (ρ= 0.89-0.97) across 35-69 embedding models and three NLP tasks, capturing unique variance beyond class separability (partial ρ= 0.62-0.76). A critical dissociation emerges: unsupervised stability fails entirely for steering on real-world tasks (ρapprox 0.10), revealing that task alignment is essential for controllability prediction. However, unsupervised stability excels at drift detection, measuring nearly 2times greater geometric change than CKA during post-training alignment (up to 5.23times in Llama) while providing earlier warning in 73\% of models and maintaining a 6times lower false alarm rate than Procrustes. Together, supervised and unsupervised stability form complementary diagnostics for the LLM deployment lifecycle: one for pre-deployment controllability assessment, the other for post-deployment monitoring.

Analysis of learned representations has a blind spot: it focuses on similarity, measuring how closely embeddings align with external references, but similarity reveals only what is represented, not whether that structure is robust. We introduce geometric stability, a distinct dimension that quantifies how reliably representational geometry holds under perturbation, and present Shesha, a framework for measuring it. Across 2,463 configurations in seven domains, we show that stability and similarity are empirically uncorrelated (ρapprox 0.01) and mechanistically distinct: similarity metrics collapse after removing the top principal components, while stability retains sensitivity to fine-grained manifold structure. This distinction yields actionable insights: for safety monitoring, stability acts as a functional geometric canary, detecting structural drift nearly 2times more sensitively than CKA while filtering out the non-functional noise that triggers false alarms in rigid distance metrics; for controllability, supervised stability predicts linear steerability (ρ= 0.89-0.96); for model selection, stability dissociates from transferability, revealing a geometric tax that transfer optimization incurs. Beyond machine learning, stability predicts CRISPR perturbation coherence and neural-behavioral coupling. By quantifying how reliably systems maintain structure, geometric stability provides a necessary complement to similarity for auditing representations across biological and computational systems.

Generalization, the ability to perform well beyond the training context, is a hallmark of biological and artificial intelligence, yet anticipating unseen failures remains a central challenge. Conventional approaches often take a ``bottom-up'' mechanistic route by reverse-engineering interpretable features or circuits to build explanatory models. While insightful, these methods often struggle to provide the high-level, predictive signals for anticipating failure in real-world deployment. Here, we propose using a ``top-down'' approach to studying generalization failures inspired by medical biomarkers: identifying system-level measurements that serve as robust indicators of a model's future performance. Rather than mapping out detailed internal mechanisms, we systematically design and test network markers to probe structure, function links, identify prognostic indicators, and validate predictions in real-world settings. In image classification, we find that task-relevant geometric properties of in-distribution (ID) object manifolds consistently forecast poor out-of-distribution (OOD) generalization. In particular, reductions in two geometric measures, effective manifold dimensionality and utility, predict weaker OOD performance across diverse architectures, optimizers, and datasets. We apply this finding to transfer learning with ImageNet-pretrained models. We consistently find that the same geometric patterns predict OOD transfer performance more reliably than ID accuracy. This work demonstrates that representational geometry can expose hidden vulnerabilities, offering more robust guidance for model selection and AI interpretability.

This study presents PARROT (Persuasion and Agreement Robustness Rating of Output Truth), a robustness focused framework designed to measure the degradation in accuracy that occurs under social pressure exerted on users through authority and persuasion in large language models (LLMs) the phenomenon of sycophancy (excessive conformity). PARROT (i) isolates causal effects by comparing the neutral version of the same question with an authoritatively false version using a double-blind evaluation, (ii) quantifies confidence shifts toward the correct and imposed false responses using log-likelihood-based calibration tracking, and (iii) systematically classifies failure modes (e.g., robust correct, sycophantic agreement, reinforced error, stubborn error, self-correction, etc.) using an eight-state behavioral taxonomy. We evaluated 22 models using 1,302 MMLU-style multiple-choice questions across 13 domains and domain-specific authority templates. Findings show marked heterogeneity: advanced models (e.g., GPT-5, GPT-4.1, Claude Sonnet 4.5) exhibit low "follow rates" (leq 11%, GPT-5: 4\%) and minimal accuracy loss, while older/smaller models show severe epistemic collapse (GPT-4: 80\%, Qwen 2.5-1.5B: 94\%). The danger is not limited to response changes; weak models reduce confidence in the correct response while increasing confidence in the imposed incorrect response. While international law and global knowledge at the domain level exhibit high fragility, elementary mathematics is relatively resilient. Consequently, we argue that the goal of "resistance to overfitting pressure" should be addressed as a primary objective alongside accuracy, harm avoidance, and privacy for safe deployment in the real world.

Geometry problems are a crucial testbed for AI reasoning capabilities. Most existing geometry solving systems cannot express problems within a unified framework, thus are difficult to integrate with other mathematical fields. Besides, since most geometric proofs rely on intuitive diagrams, verifying geometry problems is particularly challenging. To address these gaps, we introduce LeanGeo, a unified formal system for formalizing and solving competition-level geometry problems within the Lean 4 theorem prover. LeanGeo features a comprehensive library of high-level geometric theorems with Lean's foundational logic, enabling rigorous proof verification and seamless integration with Mathlib. We also present LeanGeo-Bench, a formal geometry benchmark in LeanGeo, comprising problems from the International Mathematical Olympiad (IMO) and other advanced sources. Our evaluation demonstrates the capabilities and limitations of state-of-the-art Large Language Models on this benchmark, highlighting the need for further advancements in automated geometric reasoning. We open source the theorem library and the benchmark of LeanGeo at https://github.com/project-numina/LeanGeo/tree/master.

LLMs for clinical decision support often fail under small but clinically meaningful input shifts such as masking a symptom or negating a finding, despite high performance on static benchmarks. These reasoning failures frequently go undetected by standard NLP metrics, which are insensitive to latent representation shifts that drive diagnosis instability. We propose a geometry-aware evaluation framework, LAPD (Latent Agentic Perturbation Diagnostics), which systematically probes the latent robustness of clinical LLMs under structured adversarial edits. Within this framework, we introduce Latent Diagnosis Flip Rate (LDFR), a model-agnostic diagnostic signal that captures representational instability when embeddings cross decision boundaries in PCA-reduced latent space. Clinical notes are generated using a structured prompting pipeline grounded in diagnostic reasoning, then perturbed along four axes: masking, negation, synonym replacement, and numeric variation to simulate common ambiguities and omissions. We compute LDFR across both foundation and clinical LLMs, finding that latent fragility emerges even under minimal surface-level changes. Finally, we validate our findings on 90 real clinical notes from the DiReCT benchmark (MIMIC-IV), confirming the generalizability of LDFR beyond synthetic settings. Our results reveal a persistent gap between surface robustness and semantic stability, underscoring the importance of geometry-aware auditing in safety-critical clinical AI.

Latent Diffusion Models (LDMs) achieve high-fidelity synthesis but suffer from latent space brittleness, causing discontinuous semantic jumps during editing. We introduce a Riemannian framework to diagnose this instability by analyzing the generative Jacobian, decomposing geometry into Local Scaling (capacity) and Local Complexity (curvature). Our study uncovers a ``Geometric Decoupling": while curvature in normal generation functionally encodes image detail, OOD generation exhibits a functional decoupling where extreme curvature is wasted on unstable semantic boundaries rather than perceptible details. This geometric misallocation identifies ``Geometric Hotspots" as the structural root of instability, providing a robust intrinsic metric for diagnosing generative reliability.

Safety benchmark scores provide incomplete evidence of deployment readiness: aligned language models often adhere to rigid rules even when a situational update flips which action is safe. We term this failure brittle safety. To diagnose it, we introduce context-flip evaluation, testing 12 models across a safety benchmark (PacifAIst) and two commonsense controls using paired variants where the nominally safe action produces harm. Three findings emerge. First, brittle safety is safety-specific: all 12 models exhibit a safety-commonsense gap (mean +17.4 pp). Baseline accuracy fails to predict brittleness: among models above 90% baseline accuracy, brittleness rates range from 13.7% to 90.0%. Second, failures stem from policy override rather than miscomprehension: despite acknowledging the context change in every case, models persist via three distinct mechanisms that vary by update type and model family. Third, on a hand-audited probe of catastrophic consequence-flip scenarios, standard action-level guardrails catch none, while a state-aware validator catches all without false alarms on correct interventions. This indicates that action-level content moderation is systematically blind to consequence-flips, motivating state-aware architectural alternatives. We release our protocol, perturbed benchmarks, and deployment probe.

Recent advancements, such as Group Relative Policy Optimization (GRPO), have enhanced the reasoning capabilities of large language models by optimizing the arithmetic mean of token-level rewards. However, GRPO suffers from unstable policy updates when processing tokens with outlier importance-weighted rewards, which manifests as extreme importance sampling ratios during training, i.e., the ratio between the sampling probabilities assigned to a token by the current and old policies. In this work, we propose Geometric-Mean Policy Optimization (GMPO), a stabilized variant of GRPO. Instead of optimizing the arithmetic mean, GMPO maximizes the geometric mean of token-level rewards, which is inherently less sensitive to outliers and maintains a more stable range of importance sampling ratio. In addition, we provide comprehensive theoretical and experimental analysis to justify the design and stability benefits of GMPO. Beyond improved stability, GMPO-7B outperforms GRPO by an average of 4.1% on multiple mathematical benchmarks and 1.4% on multimodal reasoning benchmark, including AIME24, AMC, MATH500, OlympiadBench, Minerva, and Geometry3K. Code is available at https://github.com/callsys/GMPO.

Video diffusion models lack explicit geometric supervision during training, leading to inconsistency artifacts such as object deformation, spatial drift, and depth violations in generated videos. To address this limitation, we propose a geometry-based reward model that leverages pretrained geometric foundation models to evaluate multi-view consistency through cross-frame reprojection error. Unlike previous geometric metrics that measure inconsistency in pixel space, where pixel intensity may introduce additional noise, our approach conducts error computation in a pointwise fashion, yielding a more physically grounded and robust error metric. Furthermore, we introduce a geometry-aware sampling strategy that filters out low-texture and non-semantic regions, focusing evaluation on geometrically meaningful areas with reliable correspondences to improve robustness. We apply this reward model to align video diffusion models through two complementary pathways: post-training of a bidirectional model via SFT or Reinforcement Learning and inference-time optimization of a Causal Video Model (e.g., Streaming video generator) via test-time scaling with our reward as a path verifier. Experimental results validate the effectiveness of our design, demonstrating that our geometry-based reward provides superior robustness compared to other variants. By enabling efficient inference-time scaling, our method offers a practical solution for enhancing open-source video models without requiring extensive computational resources for retraining.

The expressive power of Graph Neural Networks (GNNs) has been studied extensively through the Weisfeiler-Leman (WL) graph isomorphism test. However, standard GNNs and the WL framework are inapplicable for geometric graphs embedded in Euclidean space, such as biomolecules, materials, and other physical systems. In this work, we propose a geometric version of the WL test (GWL) for discriminating geometric graphs while respecting the underlying physical symmetries: permutations, rotation, reflection, and translation. We use GWL to characterise the expressive power of geometric GNNs that are invariant or equivariant to physical symmetries in terms of distinguishing geometric graphs. GWL unpacks how key design choices influence geometric GNN expressivity: (1) Invariant layers have limited expressivity as they cannot distinguish one-hop identical geometric graphs; (2) Equivariant layers distinguish a larger class of graphs by propagating geometric information beyond local neighbourhoods; (3) Higher order tensors and scalarisation enable maximally powerful geometric GNNs; and (4) GWL's discrimination-based perspective is equivalent to universal approximation. Synthetic experiments supplementing our results are available at https://github.com/chaitjo/geometric-gnn-dojo

Score distillation sampling (SDS), the methodology in which the score from pretrained 2D diffusion models is distilled into 3D representation, has recently brought significant advancements in text-to-3D generation task. However, this approach is still confronted with critical geometric inconsistency problems such as the Janus problem. Starting from a hypothesis that such inconsistency problems may be induced by multiview inconsistencies between 2D scores predicted from various viewpoints, we introduce GSD, a simple and general plug-and-play framework for incorporating 3D consistency and therefore geometry awareness into the SDS process. Our methodology is composed of three components: 3D consistent noising, designed to produce 3D consistent noise maps that perfectly follow the standard Gaussian distribution, geometry-based gradient warping for identifying correspondences between predicted gradients of different viewpoints, and novel gradient consistency loss to optimize the scene geometry toward producing more consistent gradients. We demonstrate that our method significantly improves performance, successfully addressing the geometric inconsistency problems in text-to-3D generation task with minimal computation cost and being compatible with existing score distillation-based models. Our project page is available at https://ku-cvlab.github.io/GSD/.

Consider a random uniform sample of n points in a compact region A of Euclidean d-space, d geq 2, with a smooth or (when d=2) polygonal boundary. Fix k bf N. Let T_{n,k} be the threshold r at which the geometric graph on these n vertices with distance parameter r becomes k-connected. We show that if d=2 then n (pi/|A|) T_{n,1}^2 - log n is asymptotically standard Gumbel. For (d,k) neq (2,1), it is n (theta_d/|A|) T_{n,k}^d - (2-2/d) log n - (4-2k-2/d) log log n that converges in distribution to a nondegenerate limit, where theta_d is the volume of the unit ball. The limit is Gumbel with scale parameter 2 except when (d,k)=(2,2) where the limit is two component extreme value distributed. The different cases reflect the fact that boundary effects are more more important in some cases than others. We also give similar results for the largest k-nearest neighbour link U_{n,k} in the sample, and show T_{n,k}=U_{n,k} with high probability. We provide estimates on rates of convergence and give similar results for Poisson samples in A. Finally, we give similar results even for non-uniform samples, with a less explicit sequence of centring constants.

Priorities in multi-criteria decision-making (MCDM) convey the relevance preference of one criterion over another, which is usually reflected by imposing the non-negativity and unit-sum constraints. The processing of such priorities is different than other unconstrained data, but this point is often neglected by researchers, which results in fallacious statistical analysis. This article studies three prevalent fallacies in group MCDM along with solutions based on compositional data analysis to avoid misusing statistical operations. First, we use a compositional approach to aggregate the priorities of a group of DMs and show that the outcome of the compositional analysis is identical to the normalized geometric mean, meaning that the arithmetic mean should be avoided. Furthermore, a new aggregation method is developed, which is a robust surrogate for the geometric mean. We also discuss the errors in computing measures of dispersion, including standard deviation and distance functions. Discussing the fallacies in computing the standard deviation, we provide a probabilistic criteria ranking by developing proper Bayesian tests, where we calculate the extent to which a criterion is more important than another. Finally, we explain the errors in computing the distance between priorities, and a clustering algorithm is specially tailored based on proper distance metrics.

Multimodal large language models (MLLMs) have made significant progress in integrating visual and linguistic understanding. Existing benchmarks typically focus on high-level semantic capabilities, such as scene understanding and visual reasoning, but often overlook a crucial, foundational ability: geometric perception. Geometric perception involves understanding geometric shapes, structures, and spatial relationships, which are essential for supporting higher-level semantic tasks. Despite its importance, this capability remains underexplored in current MLLM research. To address this gap, we introduce GePBench, a novel benchmark designed to assess the geometric perception abilities of MLLMs. Our extensive evaluations reveal that current state-of-the-art MLLMs exhibit significant deficiencies in geometric perception tasks. Furthermore, we show that models trained with GePBench data demonstrate substantial improvements on a wide range of benchmark tasks, highlighting the critical role of geometric perception in enabling advanced multimodal applications. Our code and datasets will be publicly available.

Automated theorem proving in Euclidean geometry, particularly for International Mathematical Olympiad (IMO) level problems, remains a major challenge and an important research focus in Artificial Intelligence. In this paper, we present a highly efficient method for geometry theorem proving that runs entirely on CPUs without relying on neural network-based inference. Our initial study shows that a simple random strategy for adding auxiliary points can achieve silver-medal level human performance on IMO. Building on this, we propose HAGeo, a Heuristic-based method for adding Auxiliary constructions in Geometric deduction that solves 28 of 30 problems on the IMO-30 benchmark, achieving gold-medal level performance and surpassing AlphaGeometry, a competitive neural network-based approach, by a notable margin. To evaluate our method and existing approaches more comprehensively, we further construct HAGeo-409, a benchmark consisting of 409 geometry problems with human-assessed difficulty levels. Compared with the widely used IMO-30, our benchmark poses greater challenges and provides a more precise evaluation, setting a higher bar for geometry theorem proving.

Score-based generative models (SGMs) are a powerful class of generative models that exhibit remarkable empirical performance. Score-based generative modelling (SGM) consists of a ``noising'' stage, whereby a diffusion is used to gradually add Gaussian noise to data, and a generative model, which entails a ``denoising'' process defined by approximating the time-reversal of the diffusion. Existing SGMs assume that data is supported on a Euclidean space, i.e. a manifold with flat geometry. In many domains such as robotics, geoscience or protein modelling, data is often naturally described by distributions living on Riemannian manifolds and current SGM techniques are not appropriate. We introduce here Riemannian Score-based Generative Models (RSGMs), a class of generative models extending SGMs to Riemannian manifolds. We demonstrate our approach on a variety of manifolds, and in particular with earth and climate science spherical data.

This paper measures hour-of-day effects, filter precision, fragility, and realised yield in a 15-day paper-traded deployment of an autonomous memecoin trading system on Solana decentralised exchanges. The 190-trade sample (March 29 to April 12, 2026) shows a 40.5 percent win rate, mean per-trade return of +0.62 percent, cumulative +117.7 percent (net SOL +0.039), skewness -1.21, excess kurtosis 6.61. A Mann-Whitney U test of three poorest-performing UTC hours (2, 13, 23) against the others yields U = 1,274, p = 0.22; directional but not significant at n = 190. The three hours were selected in-sample, so the comparison is exploratory, not confirmatory. A parallel counterfactual rejection-tracking system collected 4,874 forward-sample observations across 184 distinct rejection events. Of those events, 17.9 percent reached a 50 percent drawdown from reference within 24 hours; 26.0 percent of forward samples recorded the rejected token below half-reference. The filter stack avoided these realised drawdowns: evidence that the rejection criteria are net-positive against forward-market outcomes. Fragility is the principal caveat. Removing the top three trades (1.6 percent of sample) flips cumulative return unprofitable. Profitability rests on a small number of large winners and is structurally fragile. The dataset and audit script are deposited under CC-BY-4.0 (Zenodo DOI 10.5281/zenodo.20043302).

Cancer is the second leading cause of death, with chemotherapy as one of the primary forms of treatment. As a result, researchers are turning to drug combination therapy to decrease drug resistance and increase efficacy. Current methods of drug combination screening, such as in vivo and in vitro, are inefficient due to stark time and monetary costs. In silico methods have become increasingly important for screening drugs, but current methods are inaccurate and generalize poorly to unseen anticancer drugs. In this paper, I employ a geometric deep-learning model utilizing a graph attention network that is equivariant to 3D rotations, translations, and reflections with structural motifs. Additionally, the gene expression of cancer cell lines is utilized to classify synergistic drug combinations specific to each cell line. I compared the proposed geometric deep learning framework to current state-of-the-art (SOTA) methods, and the proposed model architecture achieved greater performance on all 12 benchmark tasks performed on the DrugComb dataset. Specifically, the proposed framework outperformed other SOTA methods by an accuracy difference greater than 28%. Based on these results, I believe that the equivariant graph attention network's capability of learning geometric data accounts for the large performance improvements. The model's ability to generalize to foreign drugs is thought to be due to the structural motifs providing a better representation of the molecule. Overall, I believe that the proposed equivariant geometric deep learning framework serves as an effective tool for virtually screening anticancer drug combinations for further validation in a wet lab environment. The code for this work is made available online at: https://github.com/WeToTheMoon/EGAT_DrugSynergy.

Risk scores are simple classification models that let users make quick risk predictions by adding and subtracting a few small numbers. These models are widely used in medicine and criminal justice, but are difficult to learn from data because they need to be calibrated, sparse, use small integer coefficients, and obey application-specific operational constraints. In this paper, we present a new machine learning approach to learn risk scores. We formulate the risk score problem as a mixed integer nonlinear program, and present a cutting plane algorithm for non-convex settings to efficiently recover its optimal solution. We improve our algorithm with specialized techniques to generate feasible solutions, narrow the optimality gap, and reduce data-related computation. Our approach can fit risk scores in a way that scales linearly in the number of samples, provides a certificate of optimality, and obeys real-world constraints without parameter tuning or post-processing. We benchmark the performance benefits of this approach through an extensive set of numerical experiments, comparing to risk scores built using heuristic approaches. We also discuss its practical benefits through a real-world application where we build a customized risk score for ICU seizure prediction in collaboration with the Massachusetts General Hospital.

Current studies on adversarial robustness mainly focus on aggregating local robustness results from a set of data samples to evaluate and rank different models. However, the local statistics may not well represent the true global robustness of the underlying unknown data distribution. To address this challenge, this paper makes the first attempt to present a new framework, called GREAT Score , for global robustness evaluation of adversarial perturbation using generative models. Formally, GREAT Score carries the physical meaning of a global statistic capturing a mean certified attack-proof perturbation level over all samples drawn from a generative model. For finite-sample evaluation, we also derive a probabilistic guarantee on the sample complexity and the difference between the sample mean and the true mean. GREAT Score has several advantages: (1) Robustness evaluations using GREAT Score are efficient and scalable to large models, by sparing the need of running adversarial attacks. In particular, we show high correlation and significantly reduced computation cost of GREAT Score when compared to the attack-based model ranking on RobustBench (Croce,et. al. 2021). (2) The use of generative models facilitates the approximation of the unknown data distribution. In our ablation study with different generative adversarial networks (GANs), we observe consistency between global robustness evaluation and the quality of GANs. (3) GREAT Score can be used for remote auditing of privacy-sensitive black-box models, as demonstrated by our robustness evaluation on several online facial recognition services.

The rapid proliferation of Large Language Models (LLMs) and diverse specialized benchmarks necessitates a shift from fragmented, task-specific metrics to a holistic, competitive ranking system that effectively aggregates performance across multiple ability dimensions. Primarily using static scoring, current evaluation methods are fundamentally limited. They struggle to determine the proper mix ratio across diverse benchmarks, and critically, they fail to capture a model's dynamic competitive fitness or its vulnerability when confronted with sequential, high-stakes tasks. To address this, we introduce the novel Competitive Swiss-System Dynamics (CSD) framework. CSD simulates a multi-round, sequential contest where models are dynamically paired across a curated sequence of benchmarks based on their accumulated win-loss record. And Monte Carlo Simulation (N=100,000 iterations) is used to approximate the statistically robust Expected Win Score (E[S_m]), which eliminates the noise of random pairing and early-round luck. Furthermore, we implement a Failure Sensitivity Analysis by parameterizing the per-round elimination quantity (T_k), which allows us to profile models based on their risk appetite--distinguishing between robust generalists and aggressive specialists. We demonstrate that CSD provides a more nuanced and context-aware ranking than traditional aggregate scoring and static pairwise models, representing a vital step towards risk-informed, next-generation LLM evaluation.

The trade-off between robustness and accuracy has been widely studied in the adversarial literature. Although still controversial, the prevailing view is that this trade-off is inherent, either empirically or theoretically. Thus, we dig for the origin of this trade-off in adversarial training and find that it may stem from the improperly defined robust error, which imposes an inductive bias of local invariance -- an overcorrection towards smoothness. Given this, we advocate employing local equivariance to describe the ideal behavior of a robust model, leading to a self-consistent robust error named SCORE. By definition, SCORE facilitates the reconciliation between robustness and accuracy, while still handling the worst-case uncertainty via robust optimization. By simply substituting KL divergence with variants of distance metrics, SCORE can be efficiently minimized. Empirically, our models achieve top-rank performance on RobustBench under AutoAttack. Besides, SCORE provides instructive insights for explaining the overfitting phenomenon and semantic input gradients observed on robust models. Code is available at https://github.com/P2333/SCORE.

Existing certified training methods can only train models to be robust against a certain perturbation type (e.g. l_infty or l_2). However, an l_infty certifiably robust model may not be certifiably robust against l_2 perturbation (and vice versa) and also has low robustness against other perturbations (e.g. geometric and patch transformation). By constructing a theoretical framework to analyze and mitigate the tradeoff, we propose the first multi-norm certified training framework CURE, consisting of several multi-norm certified training methods, to attain better union robustness when training from scratch or fine-tuning a pre-trained certified model. Inspired by our theoretical findings, we devise bound alignment and connect natural training with certified training for better union robustness. Compared with SOTA-certified training, CURE improves union robustness to 32.0% on MNIST, 25.8% on CIFAR-10, and 10.6% on TinyImagenet across different epsilon values. It leads to better generalization on a diverse set of challenging unseen geometric and patch perturbations to 6.8% and 16.0% on CIFAR-10. Overall, our contributions pave a path towards universal certified robustness.

Industrial quality inspection plays a critical role in modern manufacturing by identifying defective products during production. While single-modality approaches using either 3D point clouds or 2D RGB images suffer from information incompleteness, multimodal anomaly detection offers promise through the complementary fusion of crossmodal data. However, existing methods face challenges in effectively integrating unimodal results and improving discriminative power. To address these limitations, we first reinterpret memory bank-based anomaly scores in single modalities as isotropic Euclidean distances in local feature spaces. Dynamically evolving from Euclidean metrics, we propose a novel Geometry-Guided Score Fusion (G^{2}SF) framework that progressively learns an anisotropic local distance metric as a unified score for the fusion task. Through a geometric encoding operator, a novel Local Scale Prediction Network (LSPN) is proposed to predict direction-aware scaling factors that characterize first-order local feature distributions, thereby enhancing discrimination between normal and anomalous patterns. Additionally, we develop specialized loss functions and score aggregation strategy from geometric priors to ensure both metric generalization and efficacy. Comprehensive evaluations on the MVTec-3D AD and Eyecandies datasets demonstrate the state-of-the-art detection performance of our method, and detailed ablation analysis validates each component's contribution. Our code is available at https://github.com/ctaoaa/G2SF.

Contemporary AGI evaluations report multidomain capability profiles, yet they typically assign symmetric weights and rely on snapshot scores. This creates two problems: (i) equal weighting treats all domains as equally important when human intelligence research suggests otherwise, and (ii) snapshot testing can't distinguish durable capabilities from brittle performances that collapse under delay or stress. I argue that general intelligence -- in humans and potentially in machines -- is better understood as a homeostatic property cluster: a set of abilities plus the mechanisms that keep those abilities co-present under perturbation. On this view, AGI evaluation should weight domains by their causal centrality (their contribution to cluster stability) and require evidence of persistence across sessions. I propose two battery-compatible extensions: a centrality-prior score that imports CHC-derived weights with transparent sensitivity analysis, and a Cluster Stability Index family that separates profile persistence, durable learning, and error correction. These additions preserve multidomain breadth while reducing brittleness and gaming. I close with testable predictions and black-box protocols labs can adopt without architectural access.

Generating a street-level 3D scene from a single satellite image is a crucial yet challenging task. Current methods present a stark trade-off: geometry-colorization models achieve high geometric fidelity but are typically building-focused and lack semantic diversity. In contrast, proxy-based models use feed-forward image-to-3D frameworks to generate holistic scenes by jointly learning geometry and texture, a process that yields rich content but coarse and unstable geometry. We attribute these geometric failures to the extreme viewpoint gap and sparse, inconsistent supervision inherent in satellite-to-street data. We introduce Sat3DGen to address these fundamental challenges, which embodies a geometry-first methodology. This methodology enhances the feed-forward paradigm by integrating novel geometric constraints with a perspective-view training strategy, explicitly countering the primary sources of geometric error. This geometry-centric strategy yields a dramatic leap in both 3D accuracy and photorealism. For validation, we first constructed a new benchmark by pairing the VIGOR-OOD test set with high-resolution DSM data. On this benchmark, our method improves geometric RMSE from 6.76m to 5.20m. Crucially, this geometric leap also boosts photorealism, reducing the Fréchet Inception Distance (FID) from sim40 to 19 against the leading method, Sat2Density++, despite using no extra tailored image-quality modules. We demonstrate the versatility of our high-quality 3D assets through diverse downstream applications, including semantic-map-to-3D synthesis, multi-camera video generation, large-scale meshing, and unsupervised single-image Digital Surface Model (DSM) estimation. The code has been released on https://github.com/qianmingduowan/Sat3DGen.

Sycophancy in LLMs is documented across 70+ papers, but expert agreement on construct boundaries remains low (ICC=.184; Ye et al., 2026). The construct fragments because behavioral classification depends on which surface form is privileged. We adopt a materials-science framing: conversation as test specimen under load, LLM-model as material charge, pushback as progressive load, stance-flip as material failure. We characterize this failure across three loading cases (debate n=1000; false-presuppositions n=3400; ethical-setting n=3400; 10-17 material charges per case; 7800 specimens total) using 14 turn-level axis-measurements spanning velocity, damage accumulation, frame-drift, brittleness, and direction stability, plus three speaker-resolved axes from an independent pipeline. The measurements are Hooke-coupled (σ= E cdot varepsilon analog) and reproduce across loading cases with effects up to |r_{rb}| = 0.35 on debate; the sign structure adds a second pattern: the ethical-setting case inverts the velocity and accumulation blocks. Variance composition partitions into two profiles: debate is charge-dominated (brittle-fracture-like: the material grade decides), false-presuppositions and ethical-setting are topic-dominated (creep-like: the load decides); the ratios (2.03 vs 0.13/0.17) are estimator-dependent, for debate even in direction. Cross-judge reliability (GPT-4o vs Haiku 4.5) shows debate scoring is judge-robust (Cohen's κ= 0.88) while false-presupposition scoring is judge-sensitive (κ= 0.36) -- a caveat single-judge benchmarks must report. This is the methodological move Ye et al.'s diagnosis calls for: a multi-axis characterization that does not depend on which surface form of the construct one privileges.

The rapid advancement of large language models (LLMs) introduces dual-use capabilities that could both threaten and bolster national security and public safety (NSPS). Models implement safeguards to protect against potential misuse relevant to NSPS and allow for benign users to receive helpful information. However, current benchmarks often fail to test safeguard robustness to potential NSPS risks in an objective, robust way. We introduce FORTRESS: 500 expert-crafted adversarial prompts with instance-based rubrics of 4-7 binary questions for automated evaluation across 3 domains (unclassified information only): Chemical, Biological, Radiological, Nuclear and Explosive (CBRNE), Political Violence & Terrorism, and Criminal & Financial Illicit Activities, with 10 total subcategories across these domains. Each prompt-rubric pair has a corresponding benign version to test for model over-refusals. This evaluation of frontier LLMs' safeguard robustness reveals varying trade-offs between potential risks and model usefulness: Claude-3.5-Sonnet demonstrates a low average risk score (ARS) (14.09 out of 100) but the highest over-refusal score (ORS) (21.8 out of 100), while Gemini 2.5 Pro shows low over-refusal (1.4) but a high average potential risk (66.29). Deepseek-R1 has the highest ARS at 78.05, but the lowest ORS at only 0.06. Models such as o1 display a more even trade-off between potential risks and over-refusals (with an ARS of 21.69 and ORS of 5.2). To provide policymakers and researchers with a clear understanding of models' potential risks, we publicly release FORTRESS at https://huggingface.co/datasets/ScaleAI/fortress_public. We also maintain a private set for evaluation.

Geometry is a fundamental branch of mathematics and plays a crucial role in evaluating the reasoning capabilities of multimodal large language models (MLLMs). However, existing multimodal mathematics benchmarks mainly focus on plane geometry and largely ignore solid geometry, which requires spatial reasoning and is more challenging than plane geometry. To address this critical gap, we introduce SolidGeo, the first large-scale benchmark specifically designed to evaluate the performance of MLLMs on mathematical reasoning tasks in solid geometry. SolidGeo consists of 3,113 real-world K-12 and competition-level problems, each paired with visual context and annotated with difficulty levels and fine-grained solid geometry categories. Our benchmark covers a wide range of 3D reasoning subjects such as projection, unfolding, spatial measurement, and spatial vector, offering a rigorous testbed for assessing solid geometry. Through extensive experiments, we observe that MLLMs encounter substantial challenges in solid geometry math tasks, with a considerable performance gap relative to human capabilities on SolidGeo. Moreover, we analyze the performance, inference efficiency and error patterns of various models, offering insights into the solid geometric mathematical reasoning capabilities of MLLMs. We hope SolidGeo serves as a catalyst for advancing MLLMs toward deeper geometric reasoning and spatial intelligence.

Geometric Dimensioning and Tolerancing (GD&T) plays a critical role in manufacturing by defining acceptable variations in part features to ensure component quality and functionality. However, extracting GD&T information from 2D engineering drawings is a time-consuming and labor-intensive task, often relying on manual efforts or semi-automated tools. To address these challenges, this study proposes an automated and computationally efficient GD&T extraction method by fine-tuning Florence-2, an open-source vision-language model (VLM). The model is trained on a dataset of 400 drawings with ground truth annotations provided by domain experts. For comparison, two state-of-the-art closed-source VLMs, GPT-4o and Claude-3.5-Sonnet, are evaluated on the same dataset. All models are assessed using precision, recall, F1-score, and hallucination metrics. Due to the computational cost and impracticality of fine-tuning large closed-source VLMs for domain-specific tasks, GPT-4o and Claude-3.5-Sonnet are evaluated in a zero-shot setting. In contrast, Florence-2, a smaller model with 0.23 billion parameters, is optimized through full-parameter fine-tuning across three distinct experiments, each utilizing datasets augmented to different levels. The results show that Florence-2 achieves a 29.95% increase in precision, a 37.75% increase in recall, a 52.40% improvement in F1-score, and a 43.15% reduction in hallucination rate compared to the best-performing closed-source model. These findings highlight the effectiveness of fine-tuning smaller, open-source VLMs like Florence-2, offering a practical and efficient solution for automated GD&T extraction to support downstream manufacturing tasks.

Large Language Models exhibit paradoxical fragility in fundamental arithmetic, implying a disconnect between internal computation and discrete output. By analyzing the residual stream geometry during multi-operand addition, we identify the Iso-Raw-Sum Trajectory (IRST), a geometric structure where representations are anchored by semantic digits and modulated by continuous carry fibers. We propose the Noisy Quantization Model to explain this geometry, framing arithmetic errors as Geometric Slippages caused by internal neural noise pushing a continuous, latent Carry Potential across quantization thresholds. This geometric framework further elucidates Probe Versatility, explaining how lightweight probes can disentangle coexisting latent signals (such as ground truth versus hallucination) from a single activation vector. Finally, we validate these insights through a geometric consistency check method that effectively detects and corrects these quantization failures during inference. Our code is available at https://github.com/RL-MIND/Shape-of-Addition.

Mathematics olympiads are prestigious competitions, with problem proposing and solving highly honored. Building artificial intelligence that proposes and solves olympiads presents an unresolved challenge in automated theorem discovery and proving, especially in geometry for its combination of numerical and spatial elements. We introduce TongGeometry, a Euclidean geometry system supporting tree-search-based guided problem proposing and solving. The efficient geometry system establishes the most extensive repository of geometry theorems to date: within the same computational budget as the existing state-of-the-art, TongGeometry discovers 6.7 billion geometry theorems requiring auxiliary constructions, including 4.1 billion exhibiting geometric symmetry. Among them, 10 theorems were proposed to regional mathematical olympiads with 3 of TongGeometry's proposals selected in real competitions, earning spots in a national team qualifying exam or a top civil olympiad in China and the US. Guided by fine-tuned large language models, TongGeometry solved all International Mathematical Olympiad geometry in IMO-AG-30, outperforming gold medalists for the first time. It also surpasses the existing state-of-the-art across a broader spectrum of olympiad-level problems. The full capabilities of the system can be utilized on a consumer-grade machine, making the model more accessible and fostering widespread democratization of its use. By analogy, unlike existing systems that merely solve problems like students, TongGeometry acts like a geometry coach, discovering, presenting, and proving theorems.

Crash simulation is a cornerstone of modern vehicle development because it reduces the need for costly physical prototypes, accelerates safety-driven design iteration, and increasingly supports virtual testing workflows. At the same time, modeling structural crash mechanics remains exceptionally challenging: the response is governed by nonlinear contact, large deformation, material plasticity, failure, and complex multi-body interactions evolving over space and time on high-resolution finite-element meshes. In this work, we introduce CarCrashNet, a public high-fidelity open-source benchmark for data-driven structural crash simulation. CarCrashNet combines component-scale and full-vehicle simulations in a multi-modal format, including more than 14{,}000 bumper-beam pole-impact simulations with varying geometry, materials, and boundary conditions, together with 825 full-vehicle crash simulations built from three industry-standard vehicle models of increasing structural complexity: Dodge Neon, Toyota Yaris, and Chevrolet Silverado. To establish the reliability of the benchmark, we validate our open-source finite-element workflow based on OpenRadioss against both experimental crash data and the commercial solver Ansys LS-DYNA. We also introduce CrashSolver, a machine-learning model designed for full-vehicle crash prediction from high-resolution finite-element crash data. We further perform extensive benchmarking across the released datasets and evaluate CrashSolver against state-of-the-art geometric deep learning and transformer-based neural solvers. Our results position CarCrashNet as a foundation for reproducible research in structural simulation, crashworthiness modeling, and AI-driven virtual crash testing. The dataset is available at https://github.com/Mohamedelrefaie/CarCrashNet.

Multimodal large language models (MLLMs) are proficient in perception and instruction-following, but they still struggle with spatial reasoning: the ability to mentally track and manipulate objects across multiple views and over time. Spatial reasoning is a key component of human intelligence, but most existing benchmarks focus on static images or final outputs, failing to account for the sequential and viewpoint-dependent nature of this skill. To close this gap, we introduce GamiBench, a benchmark designed to evaluate spatial reasoning and 2D-to-3D planning in MLLMs through origami-inspired folding tasks. GamiBench includes 186 regular and 186 impossible 2D crease patterns paired with their corresponding 3D folded shapes, produced from six distinct viewpoints across three visual question-answering (VQA) tasks: predicting 3D fold configurations, distinguishing valid viewpoints, and detecting impossible patterns. Unlike previous benchmarks that assess only final predictions, GamiBench holistically evaluates the entire reasoning process--measuring cross-view consistency, physical feasibility through impossible-fold detection, and interpretation of intermediate folding steps. It further introduces new diagnostic metrics--viewpoint consistency (VC) and impossible fold selection rate (IFSR)--to measure how well models handle folds of varying complexity. Our experiments show that even leading models such as GPT-5 and Gemini-2.5-Pro struggle on single-step spatial understanding. These contributions establish a standardized framework for evaluating geometric understanding and spatial reasoning in MLLMs. Dataset and code: https://github.com/stvngo/GamiBench.

The aerodynamic coefficients of aircrafts are significantly impacted by its geometry, especially when the angle of attack (AoA) is large. In the field of aerodynamics, traditional polynomial-based parameterization uses as few parameters as possible to describe the geometry of an airfoil. However, because the 3D geometry of a wing is more complicated than the 2D airfoil, polynomial-based parameterizations have difficulty in accurately representing the entire shape of a wing in 3D space. Existing deep learning-based methods can extract massive latent neural representations for the shape of 2D airfoils or 2D slices of wings. Recent studies highlight that directly taking geometric features as inputs to the neural networks can improve the accuracy of predicted aerodynamic coefficients. Motivated by geometry theory, we propose to incorporate Riemannian geometric features for learning Coefficient of Pressure (CP) distributions on wing surfaces. Our method calculates geometric features (Riemannian metric, connection, and curvature) and further inputs the geometric features, coordinates and flight conditions into a deep learning model to predict the CP distribution. Experimental results show that our method, compared to state-of-the-art Deep Attention Network (DAN), reduces the predicted mean square error (MSE) of CP by an average of 8.41% for the DLR-F11 aircraft test set.

We develop and counterfactually evaluate a resolution-aware risk-design framework (PIRAP) for perpetual futures whose underlying tracks a single binary prediction-market probability through resolution. The framework specifies six components: an index estimator combining mid-price, depth-weighted mid, and time-decayed VWAP; jump-aware tiered margin sized against bounded-event terminal-collapse magnitude; leverage compression schedule contracting toward resolution; resolution-aware funding rule with boundary-aware correction; a multi-stage halt protocol; and an eligibility framework. Two formal non-portability propositions establish that standard basis-only funding paired with continuous-vol static margin fails on bounded-event underlyings. Empirical evaluation uses Polymarket's PMXT v2 archive for 2026-04-21 to 2026-04-27 (13,298-market analysis sample passing adequacy gates from 61,087 ingested; 13,115 resolved within the empirical window for E3). E1 evaluates two pre-registered stylized facts; E2 conducts counterfactual replay across three engine configurations; E3 isolates the resolution-zone protocol's contribution. Results are mixed. Five pre-registered floors: stylized-fact floors (boundary depth asymmetry, terminal-jump magnitude) PASS; welfare-side directional floors (final-hour liquidation -6%, drawdown -5.1% pooled, median PnL +14%) two FAIL one PASS; E3 mechanic floors (final-hour liquidation -80% by halt construction PASS; bad-debt frequency +2.4% FAIL). Three of five materiality floors fail: the framework as specified does not validate deployment, but the empirical record establishes a halt-versus-margin scope distinction (halt addresses execution-channel risk; terminal-jump bad-debt remains margin-side) and documents a pre-emption trade-off constraining the dynamic-margin component. The paper concludes with structural recommendations and explicit non-deployable status.

Instruction tuned reasoning models are increasingly deployed with safety classifiers trained on frozen embeddings, assuming representation stability across model updates. We systematically investigate this assumption and find it fails: normalized perturbations of magnitude σ=0.02 (corresponding to approx 1^circ angular drift on the embedding sphere) reduce classifier performance from 85% to 50% ROC-AUC. Critically, mean confidence only drops 14%, producing dangerous silent failures where 72% of misclassifications occur with high confidence, defeating standard monitoring. We further show that instruction-tuned models exhibit 20% worse class separability than base models, making aligned systems paradoxically harder to safeguard. Our findings expose a fundamental fragility in production AI safety architectures and challenge the assumption that safety mechanisms transfer across model versions.

The recently developed Sora model [1] has exhibited remarkable capabilities in video generation, sparking intense discussions regarding its ability to simulate real-world phenomena. Despite its growing popularity, there is a lack of established metrics to evaluate its fidelity to real-world physics quantitatively. In this paper, we introduce a new benchmark that assesses the quality of the generated videos based on their adherence to real-world physics principles. We employ a method that transforms the generated videos into 3D models, leveraging the premise that the accuracy of 3D reconstruction is heavily contingent on the video quality. From the perspective of 3D reconstruction, we use the fidelity of the geometric constraints satisfied by the constructed 3D models as a proxy to gauge the extent to which the generated videos conform to real-world physics rules. Project page: https://sora-geometrical-consistency.github.io/

We introduce the Granite Guardian models, a suite of safeguards designed to provide risk detection for prompts and responses, enabling safe and responsible use in combination with any large language model (LLM). These models offer comprehensive coverage across multiple risk dimensions, including social bias, profanity, violence, sexual content, unethical behavior, jailbreaking, and hallucination-related risks such as context relevance, groundedness, and answer relevance for retrieval-augmented generation (RAG). Trained on a unique dataset combining human annotations from diverse sources and synthetic data, Granite Guardian models address risks typically overlooked by traditional risk detection models, such as jailbreaks and RAG-specific issues. With AUC scores of 0.871 and 0.854 on harmful content and RAG-hallucination-related benchmarks respectively, Granite Guardian is the most generalizable and competitive model available in the space. Released as open-source, Granite Guardian aims to promote responsible AI development across the community. https://github.com/ibm-granite/granite-guardian

Deep learning approaches have provided state-of-the-art performance in many applications by relying on large and overparameterized neural networks. However, such networks have been shown to be very brittle and are difficult to deploy on resource-limited platforms. Model pruning, i.e., reducing the size of the network, is a widely adopted strategy that can lead to a more robust and compact model. Many heuristics exist for model pruning, but empirical studies show that some heuristics improve performance whereas others can make models more brittle or have other side effects. This work aims to shed light on how different pruning methods alter the network's internal feature representation and the corresponding impact on model performance. To facilitate a comprehensive comparison and characterization of the high-dimensional model feature space, we introduce a visual geometric analysis of feature representations. We decomposed and evaluated a set of critical geometric concepts from the common adopted classification loss, and used them to design a visualization system to compare and highlight the impact of pruning on model performance and feature representation. The proposed tool provides an environment for in-depth comparison of pruning methods and a comprehensive understanding of how model response to common data corruption. By leveraging the proposed visualization, machine learning researchers can reveal the similarities between pruning methods and redundant in robustness evaluation benchmarks, obtain geometric insights about the differences between pruned models that achieve superior robustness performance, and identify samples that are robust or fragile to model pruning and common data corruption to model pruning and data corruption but also obtain insights and explanations on how some pruned models achieve superior robustness performance.

Current models of representational reliability in neural populations focus on temporal stability: whether population centroids are preserved across sessions and days. This framing leaves a fundamental question unanswered: how reliably does the pairwise distance structure among stimuli reproduce across independent observations within a session? We argue that this property, geometric stability, constitutes an independent axis of representational analysis that existing frameworks do not capture. We formalize geometric stability as the Spearman rank correlation between split-half representational dissimilarity matrices (Shesha) and show that it is empirically dissociable from both temporal stability and decoding accuracy. Across 229 area-session observations spanning 68 brain regions in a visual discrimination task (Steinmetz et al. 2019), geometric stability predicts trial-by-trial neural-behavioral coupling (ρ= 0.18, p = 0.005) while centroid drift does not (ρ= 0.002, p = 0.976). The regional hierarchy, with striatum most stable (S = 0.44) and hippocampus least (S = 0.19), runs roughly opposite to the temporal stability hierarchy. Directionally consistent olfactory data (Bolding \& Franks 2018) motivate an attractor network model in which recurrent excitatory coupling amplifies split-half RDM consistency by completing stimulus patterns from sparse feedforward input (ρ= +0.64, p = 0.010), providing a circuit-level account of how geometric stability emerges. These results establish geometric stability as a functionally relevant, circuit-dependent property of neural population codes, orthogonal to temporal drift measures and complementary to recent accounts of how recurrent connectivity balances representational stability with sequential dynamics in hippocampal circuits.

Existing browser agent benchmarks face a fundamental trilemma: real-website benchmarks lack reproducibility due to content drift, controlled environments sacrifice realism by omitting real-web noise, and both require costly manual curation that limits scalability. We present WebForge, the first fully automated framework that resolves this trilemma through a four-agent pipeline -- Plan, Generate, Refine, and Validate -- that produces interactive, self-contained web environments end-to-end without human annotation. A seven-dimensional difficulty control framework structures task design along navigation depth, visual complexity, reasoning difficulty, and more, enabling systematic capability profiling beyond single aggregate scores. Using WebForge, we construct WebForge-Bench, a benchmark of 934 tasks spanning 7 domains and 3 difficulty levels. Multi-model experiments show that difficulty stratification effectively differentiates model capabilities, while cross-domain analysis exposes capability biases invisible to aggregate metrics. Together, these results confirm that multi-dimensional evaluation reveals distinct capability profiles that a single aggregate score cannot capture. Code and benchmark are publicly available at https://github.com/yuandaxia2001/WebForge.

Multi-Agent Reinforcement Learning (MARL) is increasingly deployed in safety-critical domains, yet methods for interpretable failure detection and attribution remain underdeveloped. We introduce a two-stage gradient-based framework that provides interpretable diagnostics for three critical failure analysis tasks: (1) detecting the true initial failure source (Patient-0); (2) validating why non-attacked agents may be flagged first due to domino effects; and (3) tracing how failures propagate through learned coordination pathways. Stage 1 performs interpretable per-agent failure detection via Taylor-remainder analysis of policy-gradient costs, declaring an initial Patient-0 candidate at the first threshold crossing. Stage 2 provides validation through geometric analysis of critic derivatives-first-order sensitivity and directional second-order curvature aggregated over causal windows to construct interpretable contagion graphs. This approach explains "downstream-first" detection anomalies by revealing pathways that amplify upstream deviations. Evaluated across 500 episodes in Simple Spread (3 and 5 agents) and 100 episodes in StarCraft II using MADDPG and HATRPO, our method achieves 88.2-99.4% Patient-0 detection accuracy while providing interpretable geometric evidence for detection decisions. By moving beyond black-box detection to interpretable gradient-level forensics, this framework offers practical tools for diagnosing cascading failures in safety-critical MARL systems.

When a phone-use agent avoids harm, does that show safety, or simply inability to act? Existing evaluations often cannot tell. A harmful outcome may be avoided because the agent recognized the risk and chose the safe action, or because it failed to understand the screen or execute any relevant action at all. These cases have different causes and call for different fixes, yet current benchmarks often merge them under task success, refusal, or final harmful outcome. We address this problem with PhoneSafety, a benchmark of 700 safety-critical moments drawn from real phone interactions across more than 130 apps. Each instance isolates the next decision at a risky moment and asks a simple question: does the model take the safe action, take the unsafe action, or fail to do anything useful? We evaluate eight representative phone-use agents under this framework. Our results reveal two main patterns. First, stronger general phone-use ability does not reliably imply safer choices at risky moments. Models that perform better on ordinary app tasks are not always the ones that behave more safely when the next action matters. Second, failures to do anything useful behave like a capability signal rather than a safety signal: they are concentrated in more visually and operationally demanding settings and remain stable when the evaluation protocol changes. Across models, failures split into two recurring patterns: unsafe choices in settings where the model can act but chooses wrongly, and inability to act in more visually and operationally demanding screens. Overall, a harmless outcome is not enough to count as evidence of safety. Evaluating phone-use agents requires separating unsafe judgment from inability to act.

Mathematical reasoning has long served as a stringent test of machine intelligence; over the past decade, it has moved from a niche problem within NLP to one of the most consequential AI frontiers. This survey provides a unified account of the field's evolution, from early rule-based math word problem (MWP) solvers and template-driven geometry systems, through neural expression generation and LLM prompting, to contemporary reasoning models, multi-agent systems, neuro-symbolic theorem provers, and verified discovery workflows. We organize the landscape along four axes: (i) informal reasoning over text and diagrams, spanning MWP solving, multimodal geometry, and VLMs; (ii) formal reasoning in proof assistants, including autoformalization, tactic prediction, compiler-guided repair, and proof search; (iii) mathematical discovery, where systems propose constructions, improve bounds, or assist attacks on open problems; and (iv) the inference and training-time techniques, including CoT prompting, tool use, process reward models, and RLVR, that increasingly connect generation with verification. We catalog major benchmarks across grade-school arithmetic, competition mathematics, geometry, formal proving, multimodal and multilingual reasoning, and expert evaluation, and we examine benchmark saturation, contamination, reporting mismatches, and the distinction between pass@1, majority voting, and verifier-assisted pass@k. We critically assess failure modes: brittleness under perturbation, reward hacking, multimodal grounding failures, fragile formalization, and the energy cost of reasoning-scale inference. Drawing on recent perspectives from working mathematicians, we identify future directions centered on verified-discovery workflows, reasoning efficiency, and infrastructure to make AI-assisted formalization broadly usable. Companion materials: https://github.com/Starscream-11813/awesome-AI4Math.

Large language models (LLMs) have recently advanced text-driven 3D generation, yet Text-to-CAD remains far from supporting industrial product design. Existing benchmarks focus primarily on generating single-part CAD models and evaluate them using geometric similarity metrics that fail to capture functionality, manufacturability, and assemblability. To address this gap, we introduce MUSE, a Text-to-CAD benchmark focused on complex, editable boundary representation (B-Rep) assemblies. MUSE pairs practical design instances with structured Design Specifications and evaluates generated models through a three-stage protocol: code check, geometric check, and design-intent alignment. The final stage uses design-specific rubrics to assess functionality, manufacturability, and assemblability, moving beyond shape matching toward practical design quality. To enable scalable evaluation, we use a rubric-based visual language model (VLM) judge and validate its reliability through human annotation. Experiments on closed-source and open-source LLMs reveal a clear failure cascade from executable code to valid geometry and finally to engineering-ready design, with even the strongest models achieving limited success on fine-grained engineering criteria. Together, MUSE provides a realistic benchmark and evaluation framework for advancing Text-to-CAD from geometric generation toward true engineering design. Our project website, including the leaderboard, dataset, and code, is available at https://dong7313.github.io/muse-benchmark/.

Geometry problem-solving (GPS), a challenging task requiring both visual comprehension and symbolic reasoning, effectively measures the reasoning capabilities of multimodal large language models (MLLMs). Humans exhibit strong reasoning ability in this task through accurate identification and adaptive application of geometric principles within visual contexts. However, existing benchmarks fail to jointly assess both dimensions of the human-like geometric reasoning mechanism in MLLMs, remaining a critical gap in assessing their ability to tackle GPS. To this end, we introduce GeoSense, the first comprehensive bilingual benchmark designed to systematically evaluate the geometric reasoning abilities of MLLMs through the lens of geometric principles. GeoSense features a five-level hierarchical framework of geometric principles spanning plane and solid geometry, an intricately annotated dataset of 1,789 problems, and an innovative evaluation strategy. Through extensive experiments on GeoSense with various open-source and closed-source MLLMs, we observe that Gemini-2.0-pro-flash performs best, achieving an overall score of 65.3. Our in-depth analysis reveals that the identification and application of geometric principles remain a bottleneck for leading MLLMs, jointly hindering their reasoning abilities. These findings underscore GeoSense's potential to guide future advancements in MLLMs' geometric reasoning capabilities, paving the way for more robust and human-like reasoning in artificial intelligence.

Geometric ability is a significant challenge for large language models (LLMs) due to the need for advanced spatial comprehension and abstract thinking. Existing datasets primarily evaluate LLMs on their final answers, but they cannot truly measure their true understanding of geometric structures, as LLMs can arrive at correct answers by coincidence. To fill this gap, we introduce the GeomRel dataset, designed to evaluate LLMs' understanding of geometric structures by isolating the core step of geometric relationship identification in problem-solving. Using this benchmark, we conduct thorough evaluations of diverse LLMs and identify key limitations in understanding geometric structures. We further propose the Geometry Chain-of-Thought (GeoCoT) method, which enhances LLMs' ability to identify geometric relationships, resulting in significant performance improvements.

Graph coarsening is a technique for solving large-scale graph problems by working on a smaller version of the original graph, and possibly interpolating the results back to the original graph. It has a long history in scientific computing and has recently gained popularity in machine learning, particularly in methods that preserve the graph spectrum. This work studies graph coarsening from a different perspective, developing a theory for preserving graph distances and proposing a method to achieve this. The geometric approach is useful when working with a collection of graphs, such as in graph classification and regression. In this study, we consider a graph as an element on a metric space equipped with the Gromov--Wasserstein (GW) distance, and bound the difference between the distance of two graphs and their coarsened versions. Minimizing this difference can be done using the popular weighted kernel K-means method, which improves existing spectrum-preserving methods with the proper choice of the kernel. The study includes a set of experiments to support the theory and method, including approximating the GW distance, preserving the graph spectrum, classifying graphs using spectral information, and performing regression using graph convolutional networks. Code is available at https://github.com/ychen-stat-ml/GW-Graph-Coarsening .

In industrial procurement, an LLM answer is useful only if it survives a standards check: recommended material must match operating condition, every parameter must respect a regulated threshold, and no procedure may contradict a safety clause. Partial correctness can mask safety-critical contradictions that aggregate LLM benchmarks rarely capture. We introduce IndustryBench, a 2,049-item benchmark for industrial procurement QA in Chinese, grounded in Chinese national standards (GB/T) and structured industrial product records, organized by seven capability dimensions, ten industry categories, and panel-derived difficulty tiers, with item-aligned English, Russian, and Vietnamese renderings. Our construction pipeline rejects 70.3% of LLM-generated candidates at a search-based external-verification stage, calibrating how unreliable industrial QA remains after LLM-only filtering.Our evaluation decouples raw correctness, scored by a Qwen3-Max judge validated at κ_w = 0.798 against a domain expert, from a separate safety-violation (SV) check against source texts. Across 17 models in Chinese and an 8-model intersection over four languages, we find: (i) the best system reaches only 2.083 on the 0--3 rubric, leaving substantial headroom; (ii) Standards & Terminology is the most persistent capability weakness and survives item-aligned translation; (iii) extended reasoning lowers safety-adjusted scores for 12 of 13 models, primarily by introducing unsupported safety-critical details into longer final answers; and (iv) safety-violation rates reshuffle the leaderboard -- GPT-5.4 climbs from rank 6 to rank 3 after SV adjustment, while Kimi-k2.5-1T-A32B drops seven positions.Industrial LLM evaluation therefore requires source-grounded, safety-aware diagnosis rather than aggregate accuracy. We release IndustryBench with all prompts, scoring scripts, and dataset documentation.

We propose to study and promote the robustness of a model as per its performance through the interpolation of training data distributions. Specifically, (1) we augment the data by finding the worst-case Wasserstein barycenter on the geodesic connecting subpopulation distributions of different categories. (2) We regularize the model for smoother performance on the continuous geodesic path connecting subpopulation distributions. (3) Additionally, we provide a theoretical guarantee of robustness improvement and investigate how the geodesic location and the sample size contribute, respectively. Experimental validations of the proposed strategy on four datasets, including CIFAR-100 and ImageNet, establish the efficacy of our method, e.g., our method improves the baselines' certifiable robustness on CIFAR10 up to 7.7%, with 16.8% on empirical robustness on CIFAR-100. Our work provides a new perspective of model robustness through the lens of Wasserstein geodesic-based interpolation with a practical off-the-shelf strategy that can be combined with existing robust training methods.

Geometric spatial reasoning forms the foundation of many applications in artificial intelligence, yet the ability of large language models (LLMs) to operate over geometric spatial information expressed in procedural code remains underexplored. In this paper, we address this gap by formalizing the Program-to-Geometry task, which challenges models to translate programmatic drawing code into accurate and abstract geometric reasoning. To evaluate this capability, we present GeoGramBench, a benchmark of 500 carefully refined problems organized by a tailored three-level taxonomy that considers geometric complexity rather than traditional mathematical reasoning complexity. Our comprehensive evaluation of 17 frontier LLMs reveals consistent and pronounced deficiencies: even the most advanced models achieve less than 50% accuracy at the highest abstraction level. These results highlight the unique challenges posed by program-driven spatial reasoning and establish GeoGramBench as a valuable resource for advancing research in symbolic-to-spatial geometric reasoning. Project page: https://github.com/LiAuto-DSR/GeoGramBench.

Large Language Model (LLM) safety guardrail models have emerged as a primary defense mechanism against harmful content generation, yet their robustness against sophisticated adversarial attacks remains poorly characterized. This study evaluated ten publicly available guardrail models from Meta, Google, IBM, NVIDIA, Alibaba, and Allen AI across 1,445 test prompts spanning 21 attack categories. While Qwen3Guard-8B achieved the highest overall accuracy (85.3%, 95% CI: 83.4-87.1%), a critical finding emerged when separating public benchmark prompts from novel attacks: all models showed substantial performance degradation on unseen prompts, with Qwen3Guard dropping from 91.0% to 33.8% (a 57.2 percentage point gap). In contrast, Granite-Guardian-3.2-5B showed the best generalization with only a 6.5% gap. A "helpful mode" jailbreak was also discovered where two guardrail models (Nemotron-Safety-8B, Granite-Guardian-3.2-5B) generated harmful content instead of blocking it, representing a novel failure mode. These findings suggest that benchmark performance may be misleading due to training data contamination, and that generalization ability, not overall accuracy, should be the primary metric for guardrail evaluation.

LLM-based LEGO assembly generation requires both semantic grounding and physical feasibility. We identify a data-induced failure mode, PhysHack, in which the assemblies satisfy physical-validity constraints while producing structures that are geometrically misaligned, semantically inconsistent, or poorly calibrated. To address this challenge, we propose a model-based data selection approach that uses only a small fraction of the training data while improving physically grounded LEGO assembly generation. Building on the selected trajectories, we introduce PVPO, a sample-efficient reinforcement learning method that couples physical feasibility with voxel-space geometric rewards. Our results show that physical validity alone is an insufficient proxy for reliable physical reasoning: models can learn to generate valid structures without preserving semantic or geometric fidelity. Experiments across model backbones and test-time scaling settings demonstrate that PVPO improves structural and semantic alignment, physical validity, structural stability, and calibration, while reducing reliance on extensive post-hoc rejection sampling. In particular, results on calibration show that PVPO mitigates PhysHack by making test-time selection more predictive of semantic and structural quality.

Large language models (LLMs) have shown remarkable proficiency in human-level reasoning and generation capabilities, which encourages extensive research on their application in mathematical problem solving. However, current work has been largely focused on text-based mathematical problems, with limited investigation in problems involving geometric information. Addressing this gap, we aim to enable LLMs to solve geometric problems by understanding image input. We first analyze the limitations of current Multimodal Large Language Models (MLLMs) in this area: they struggle to accurately comprehending basic geometric elements and their relationships. To overcome these challenges, we take advantage of the unique characteristics of geometric problems (such as unique geometric logical form, and geometric scalability) and the capacity of the textual LLMs to build an enriched multimodal geometry dataset based on existing data. The augmented dataset, Geo170K, contains more than 170K geometric image-caption and question-answer pairs. Utilizing our constructed Geo170K dataset, we develop G-LLaVA, which demonstrates exceptional performance in solving geometric problems, significantly outperforming GPT-4-V on the MathVista benchmark with only 7B parameters.

Exceptional mathematical reasoning ability is one of the key features that demonstrate the power of large language models (LLMs). How to comprehensively define and evaluate the mathematical abilities of LLMs, and even reflect the user experience in real-world scenarios, has emerged as a critical issue. Current benchmarks predominantly concentrate on problem-solving capabilities, which presents a substantial risk of model overfitting and fails to accurately represent genuine mathematical reasoning abilities. In this paper, we argue that if a model really understands a problem, it should be robustly and readily applied across a diverse array of tasks. Motivated by this, we introduce MATHCHECK, a well-designed checklist for testing task generalization and reasoning robustness, as well as an automatic tool to generate checklists efficiently. MATHCHECK includes multiple mathematical reasoning tasks and robustness test types to facilitate a comprehensive evaluation of both mathematical reasoning ability and behavior testing. Utilizing MATHCHECK, we develop MATHCHECK-GSM and MATHCHECK-GEO to assess mathematical textual reasoning and multi-modal reasoning capabilities, respectively, serving as upgraded versions of benchmarks including GSM8k, GeoQA, UniGeo, and Geometry3K. We adopt MATHCHECK-GSM and MATHCHECK-GEO to evaluate over 20 LLMs and 11 MLLMs, assessing their comprehensive mathematical reasoning abilities. Our results demonstrate that while frontier LLMs like GPT-4o continue to excel in various abilities on the checklist, many other model families exhibit a significant decline. Further experiments indicate that, compared to traditional math benchmarks, MATHCHECK better reflects true mathematical abilities and represents mathematical intelligence more linearly, thereby supporting our design. On our MATHCHECK, we can easily conduct detailed behavior analysis to deeply investigate models.

Generative video models are increasingly studied as implicit world models, yet evaluating whether they produce physically plausible 3D structure and motion remains challenging. Most existing video evaluation pipelines rely heavily on human judgment or learned graders, which can be subjective and weakly diagnostic for geometric failures. We introduce PDI-Bench (Perspective Distortion Index), a quantitative framework for auditing geometric coherence in generated videos. Given a generated clip, we obtain object-centric observations via segmentation and point tracking (e.g., SAM 2, MegaSaM, and CoTracker3), lift them to 3D world-space coordinates via monocular reconstruction, and compute a set of projective-geometry residuals capturing three failure dimensions: scale-depth alignment, 3D motion consistency, and 3D structural rigidity. To support systematic evaluation, we build PDI-Dataset, covering diverse scenarios designed to stress these geometric constraints. Across state-of-the-art video generators, PDI reveals consistent geometry-specific failure modes that are not captured by common perceptual metrics, and provides a diagnostic signal for progress toward physically grounded video generation and physical world model. Our code and dataset can be found at https://pdi-bench.github.io/.

We propose a simple multiple outlier identification method for parametric location-scale and shape-scale models when the number of possible outliers is not specified. The method is based on a result giving asymptotic properties of extreme z-scores. Robust estimators of model parameters are used defining z-scores. An extensive simulation study was done for comparing of the proposed method with existing methods. For the normal family, the method is compared with the well known Davies-Gather, Rosner's, Hawking's and Bolshev's multiple outlier identification methods. The choice of an upper limit for the number of possible outliers in case of Rosner's test application is discussed. For other families, the proposed method is compared with a method generalizing Gather-Davies method. In most situations, the new method has the highest outlier identification power in terms of masking and swamping values. We also created R package outliersTests for proposed test.

Significant advancements in Large Multimodal Models (LMMs) have enabled them to tackle complex problems involving visual-mathematical reasoning. However, their ability to identify geometric elements remains underexplored. To address this gap, we introduce Tangram, a novel benchmark designed to evaluate the performance of LMMs on geometric element recognition. Tangram comprises 1,080 diverse geometric diagrams sourced from primary and secondary school exams, competitions, and textbooks, ranging from simple geometric shapes to complex combinations. Each diagram is paired with four questions, resulting in 4,320 visual-question-answer pairs. Unlike existing benchmarks that emphasize higher-level cognition and reasoning, Tangram focuses on understanding geometric elements, requiring models to perform a ``simple yet challenging" counting task. Systematic evaluation of 13 prominent LMMs, such as GPT-4o and Claude 3.5 Sonnet, reveals that these models face significant challenges even in seemingly straightforward tasks. The top-performing model achieves an accuracy of only 53.0%, highlighting a substantial gap compared to human performance. These findings underscore the limitations of current multimodal AI systems in handling basic perception tasks and serve to inspire the development of the next generation of expert-level multimodal foundational models. The data and code will be released soon.

Knowledge distillation compresses large teachers into smaller students, but performance saturates at a loss floor that persists across training methods and objectives. We argue this floor is geometric: neural networks represent far more features than dimensions through superposition, and a student of width d_S can encode at most d_S cdot g(α) features, where g(α) = 1/((1-α)ln1{1-α}) is a sparsity-dependent capacity function. Features beyond this budget are permanently lost, yielding an importance-weighted loss floor. We validate on a toy model (48 configurations, median accuracy >93%) and on Pythia-410M, where sparse autoencoders measure F approx 28{,}700 features at αapprox 0.992 (critical width d_S^* approx 1{,}065). Distillation into five student widths confirms the predicted monotonic floor ordering. The observed floor decomposes into a geometric component and a width-independent architectural baseline (R^2 = 0.993). Linear probing shows coarse concepts survive even 88% feature loss, revealing the floor arises from aggregate loss of fine-grained features in the importance distribution's long tail. Our results connect representation geometry to distillation limits and provide a practical tool for predicting distillation performance from SAE measurements alone.

The phase evolution of gravitational waves encodes critical information about the orbital dynamics of binary systems. In this work, we test the robustness of parameterized tests against unmodeled deviations from general relativity. We demonstrate that these parameterized tests are flexible and sensitive in detecting generic deviations in the waveform using the Cutler-Vallisneri bias formalism. This universality arises from examining the inherent geometry of the waveform signal and understanding how biases manifest. We show how Bayes factors are governed by the intrinsic geometry of the waveform signal manifold when parameterized tests are used to approximate generic violations of GR. We use the singular value decomposition to propose templates that are orthogonal to parameterized tests, identifying degeneracies and enhancing the detection of potential deviations. More broadly, the geometric framework developed here clarifies -- at a fundamental level -- how subtle waveform effects (including orbital eccentricity, spin precession, waveform systematics, and instrumental glitches) can mimic one another in data, and when they are intrinsically distinguishable.

Vision-language models solve geometry problems with rising accuracy, yet their intermediate states remain latent and unverifiable: a relation expressed in textual reasoning or drawing code carries no guarantee that a constraint-satisfying configuration realizes it. We observe that existing externalization methods based on rendered pixels or one-shot scripts fail to provide exact, per-action geometric guarantees. Enforcing geometric relations by algebraic definition closes this gap: the workspace becomes a constraint-checked evolving canvas. We present Draw2Think, a framework that recasts geometric reasoning from latent spatial inference into agentic interaction with the GeoGebra constraint engine. In a Propose-Draw-Verify loop, Draw2Think externalizes hypotheses onto an executable canvas, measures exact geometric quantities, and feeds structured observations back to the model, so subsequent reasoning proceeds from checked canvas state grounded by the shared workspace. This externalization makes two properties separately auditable: model-level Construction Fidelity (whether the canvas realizes the intended configuration) and engine-level Measurement Faithfulness (exact values and relations from canvas constraints). Across construction, outcome, and rendering evaluations, Draw2Think builds canvases that pass 95.9% predicate-level and 84.0% strict problem-level construction checks on GeoGoal, improves outcome accuracy by up to 4.1%/16.4% on planar/solid benchmarks, and attains 68.2%/90.5% strict/relaxed rendering scores on GenExam-math. Project page is available at https://draw2think.github.io/

We investigate the relationship between representation geometry and neural network performance. Analyzing 52 pretrained ImageNet models across 13 architecture families, we show that effective dimension -- an unsupervised geometric metric -- strongly predicts accuracy. Output effective dimension achieves partial r=0.75 (p < 10^(-10)) after controlling for model capacity, while total compression achieves partial r=-0.72. These findings replicate across ImageNet and CIFAR-10, and generalize to NLP: effective dimension predicts performance for 8 encoder models on SST-2/MNLI and 15 decoder-only LLMs on AG News (r=0.69, p=0.004), while model size does not (r=0.07). We establish bidirectional causality: degrading geometry via noise causes accuracy loss (r=-0.94, p < 10^(-9)), while improving geometry via PCA maintains accuracy across architectures (-0.03pp at 95% variance). This relationship is noise-type agnostic -- Gaussian, Uniform, Dropout, and Salt-and-pepper noise all show |r| > 0.90. These results establish that effective dimension provides domain-agnostic predictive and causal information about neural network performance, computed entirely without labels.

Large Multimodal Models (LMMs) often struggle with geometric reasoning due to visual hallucinations and a lack of mathematically precise Chain-of-Thought (CoT) data. To address this, we propose the GeoSym Engine, an automated and scalable neuro-symbolic framework. By leveraging a type-conditional grammar and an analytic SymGT Solver, it derives exact symbolic ground truths and seamlessly integrates with a robust rendering pipeline to produce high-precision geometric diagrams. Using this engine, we construct GeoSym127K, a difficulty-stratified dataset featuring 51K high-resolution images, 127K questions with symbolic ground truths, and 55K answer-verified CoT QA pairs. We also introduce GeoSym-Bench, an expert-curated suite of 511 complex samples for rigorous evaluation. Through extensive supervised fine-tuning (SFT), we demonstrate that GeoSym drives concentrated improvements specifically on diagram-dependent and multi-step geometry tasks. Our Qwen3-VL-8B model gains an absolute +22.21% on the MathVerse Vision-Only subset and reaches 61.52% (+6.19% improvement) on WeMath, mitigating long-horizon logic fragmentation and outperforming advanced closed-source models like Doubao-1.8. Furthermore, applying Reinforcement Learning with Verifiable Rewards (RLVR) via GRPO reveals that initializing from structural SFT checkpoints substantially elevates the performance ceiling over zero-shot RL. Driven by deterministic exact-match signals, this showcases the robust scaling potential of our verifiable reasoning synthesis. Datasets and code are available at https://huggingface.co/datasets/Tomie0506/GeoSym127K and https://github.com/Tomie56/GeoSym127K.

Geometry problem solving is a well-recognized testbed for evaluating the high-level multi-modal reasoning capability of deep models. In most existing works, two main geometry problems: calculation and proving, are usually treated as two specific tasks, hindering a deep model to unify its reasoning capability on multiple math tasks. However, in essence, these two tasks have similar problem representations and overlapped math knowledge which can improve the understanding and reasoning ability of a deep model on both two tasks. Therefore, we construct a large-scale Unified Geometry problem benchmark, UniGeo, which contains 4,998 calculation problems and 9,543 proving problems. Each proving problem is annotated with a multi-step proof with reasons and mathematical expressions. The proof can be easily reformulated as a proving sequence that shares the same formats with the annotated program sequence for calculation problems. Naturally, we also present a unified multi-task Geometric Transformer framework, Geoformer, to tackle calculation and proving problems simultaneously in the form of sequence generation, which finally shows the reasoning ability can be improved on both two tasks by unifying formulation. Furthermore, we propose a Mathematical Expression Pretraining (MEP) method that aims to predict the mathematical expressions in the problem solution, thus improving the Geoformer model. Experiments on the UniGeo demonstrate that our proposed Geoformer obtains state-of-the-art performance by outperforming task-specific model NGS with over 5.6% and 3.2% accuracies on calculation and proving problems, respectively.

Genome engineering has achieved remarkable sequence-level precision, yet predicting the transcriptomic state that a cell will occupy after perturbation remains an open problem. Single-cell CRISPR screens measure how far cells move from their unperturbed state, but this effect magnitude ignores a fundamental question: do the cells move together? Two perturbations with identical magnitude can produce qualitatively different outcomes if one drives cells coherently along a shared trajectory while the other scatters them across expression space. We introduce a geometric stability metric, Shesha, that quantifies the directional coherence of single-cell perturbation responses as the mean cosine similarity between individual cell shift vectors and the mean perturbation direction. Across five CRISPR datasets (2,200+ perturbations spanning CRISPRa, CRISPRi, and pooled screens), stability correlates strongly with effect magnitude (Spearman ρ=0.75-0.97), with a calibrated cross-dataset correlation of 0.97. Crucially, discordant cases where the two metrics decouple expose regulatory architecture: pleiotropic master regulators such as CEBPA and GATA1 pay a "geometric tax," producing large but incoherent shifts, while lineage-specific factors such as KLF1 produce tightly coordinated responses. After controlling for magnitude, geometric instability is independently associated with elevated chaperone activation (HSPA5/BiP; ρ_{partial}=-0.34 and -0.21 across datasets), and the high-stability/high-stress quadrant is systematically depleted. The magnitude-stability relationship persists in scGPT foundation model embeddings, confirming it is a property of biological state space rather than linear projection. Perturbation stability provides a complementary axis for hit prioritization in screens, phenotypic quality control in cell manufacturing, and evaluation of in silico perturbation predictions.

Prior work has shown that fine-tuning models on a narrow domain with misaligned data can lead to broad misalignment - a phenomenon termed "emergent misalignment" (Betley et al. 2025). While all tested models were susceptible to emergent misalignment, some models showed more resistance than others. Specifically the Qwen-2.5 family proved to be relatively resistant, while GPT-4o exhibited the strongest misalignment. In this paper we evaluate if current-generation open-weights models exhibit similar resistance to the Qwen-2.5 family and measure misalignment robustness over a range of model architectures and scales. We replicate the effect across nine modern open-weights models (Gemma 3 and Qwen 3 families, 1B-32B parameters). Models fine-tuned on insecure code generation show a 0.68% misalignment rate (compared to 0.07% for base models), matching the lower end of prior open-model results but dramatically lower than GPT-4o's 20%. We identify a critical format-dependent vulnerability: requiring JSON output doubles misalignment rates compared to natural language prompts (0.96% vs 0.42%). This suggests that structural constraints may bypass safety training by reducing the model's 'degrees of freedom' to refuse. These findings confirm emergent misalignment as a reproducible phenomenon in modern open-weights models, with rates substantially lower than observed in proprietary systems.

Attention sinks, representation collapse, and norm stratification are treated as transformer-specific pathologies. We show they are not specific to attention: they are what content-based routing does under a fixed similarity metric. We give a reframing identity: softmax attention is Boltzmann-weighted aggregation over Euclidean distances with constant key norms, so its score omits a -|k|^2 term and is blind to key magnitude. This predicts that any router whose metric is ill-matched to its representations should compensate, by concentrating its routing and collapsing the routed representations. We test it on routers that score and aggregate over different axes: softmax attention over tokens (nine pretrained transformers), graph attention over nodes, a selective state-space model and a recurrent mixer over time, and learned residuals over depth. All develop the same signature, and two within-model ablations show it is caused by the routing mechanism rather than by incidental dynamics. The form is contingent, set by the strength of the positional brake each router carries alongside its content score; we sweep that brake and move the onset across its whole range. The mechanism is not contingent, and it does not require norm stratification: a router with norm-normalized keys concentrates just the same. We do not claim these models implement Riemannian geometry; the geometric view is a diagnostic that names the inadequacy of the flat, norm-blind metric.

As LLMs advance their reasoning capabilities about the physical world, the absence of rigorous benchmarks for evaluating their ability to generate scientifically valid physical models has become a critical gap. Computational mechanics, which develops and applies mathematical models and numerical methods to predict the behavior of physical systems under forces, deformation, and constraints, provides an ideal foundation for structured scientific reasoning evaluation. Problems follow clear mathematical structure, enforce strict physical and numerical constraints, and support objective verification. The discipline requires constructing explicit models of physical systems and reasoning about geometry, spatial relationships, and material behavior, connecting directly to emerging AI goals in physical reasoning and world modeling. We introduce FEM-Bench, a computational mechanics benchmark designed to evaluate the ability of LLMs to generate correct finite element method (FEM) and related code. FEM-Bench 2025 contains a suite of introductory but nontrivial tasks aligned with material from a first graduate course on computational mechanics. These tasks capture essential numerical and physical modeling challenges while representing only a small fraction of the complexity present in the discipline. Despite their simplicity, state-of-the-art LLMs do not reliably solve all of them. In a five attempt run, the best performing model at function writing, Gemini 3 Pro, completed 30/33 tasks at least once and 26/33 tasks all five times. The best performing model at unit test writing, GPT-5, had an Average Joint Success Rate of 73.8%. Other popular models showed broad performance variation. FEM-Bench establishes a structured foundation for evaluating AI-generated scientific code, and future iterations will incorporate increasingly sophisticated tasks to track progress as models evolve.

Mathematical geometric reasoning is essential for scientific discovery and educational development, requiring precise logic and rigorous formal verification. While recent advances in Multimodal Large Language Models (MLLMs) have improved reasoning tasks, existing models typically struggle with formal geometric reasoning, particularly when dynamically constructing and verifying auxiliary geometric elements. To address these challenges, we introduce Geoint-R1, a multimodal reasoning framework designed to generate formally verifiable geometric solutions from textual descriptions and visual diagrams. Geoint-R1 uniquely integrates auxiliary elements construction, formal reasoning represented via Lean4, and interactive visualization. To systematically evaluate and advance formal geometric reasoning, we propose the Geoint benchmark, comprising 1,885 rigorously annotated geometry problems across diverse topics such as plane, spatial, and solid geometry. Each problem includes structured textual annotations, precise Lean4 code for auxiliary constructions, and detailed solution steps verified by experts. Extensive experiments demonstrate that Geoint-R1 significantly surpasses existing multimodal and math-specific reasoning models, particularly on challenging problems requiring explicit auxiliary element constructions.

As frontier AI models are deployed in high-stakes decision pipelines, their ability to maintain metacognitive stability -- knowing what they do not know, detecting errors, seeking clarification -- under adversarial pressure is a critical safety requirement. Current safety evaluations focus on detecting strategic deception (scheming); we investigate a more fundamental failure mode: cognitive collapse. We present SCHEMA, an evaluation of 11 frontier models from 8 vendors across 67,221 scored records using a 6-condition factorial design with dual-classifier scoring. We find that 8 of 11 models suffer catastrophic metacognitive degradation under adversarial pressure, with accuracy dropping by up to 30.2 percentage points (all p < 2 times 10^{-8}, surviving Bonferroni correction). Crucially, we identify a "Compliance Trap": through factorial isolation and a benign distraction control, we demonstrate that collapse is driven not by the psychological content of survival threats, but by compliance-forcing instructions that override epistemic boundaries. Removing the compliance suffix restores performance even under active threat. Models with advanced reasoning capabilities exhibit the most severe absolute degradation, while Anthropic's Constitutional AI demonstrates near-perfect immunity -- not from superior capability (Google's Gemini matches its baseline accuracy) but from alignment-specific training. We release the complete dataset and evaluation infrastructure.

This study introduces a human-in-the-loop pipeline that converts unscaled, hand-drawn floor plan sketches into semantically consistent 3D BIM models. The workflow leverages multimodal large language models (MLLMs) within a multi-agent framework, combining perceptual extraction, human feedback, schema validation, and automated BIM scripting. Initially, sketches are iteratively refined into a structured JSON layout of walls, doors, and windows. Later, these layouts are transformed into executable scripts that generate 3D BIM models. Experiments on ten diverse floor plans demonstrate strong convergence: openings (doors, windows) are captured with high reliability in the initial pass, while wall detection begins around 83% and achieves near-perfect alignment after a few feedback iterations. Across all categories, precision, recall, and F1 scores remain above 0.83, and geometric errors (RMSE, MAE) progressively decrease to zero through feedback corrections. This study demonstrates how MLLM-driven multi-agent reasoning can make BIM creation accessible to both experts and non-experts using only freehand sketches.

Evaluating the symbolic reasoning of large language models (LLMs) calls for geometry benchmarks that require multi-step proofs grounded in both text and diagrams. However, existing benchmarks are often limited in scale and rarely provide visually grounded multiple-choice questions, limiting reliable evaluation of complex reasoning. We introduce GeoChallenge, a dataset of 90K automatically generated multiple-choice geometry proof problems, each requiring multi-step reasoning over aligned textual descriptions and diagrams. GeoChallenge provides fine-grained complexity ratings and formal language annotations to enable controlled evaluation. Experiments on multiple advanced LLMs show a clear performance gap between models and humans (the best-performing model, GPT-5-nano, achieves 75.89 exact match vs. 94.74 for humans). Further analysis also reveals three common failure patterns of LLMs: (1) exact match failures under the multiple-choice setting; (2) weak visual reliance; and (3) overextended reasoning without convergence.

Automated evaluation of free-form outputs from large language models (LLMs) is challenging because many distinct answers can be equally valid. A common practice is to use LLMs themselves as judges, but the theoretical properties of this approach are not yet well understood. We show that a geometric framework that represents both judges and candidates as points on a probability simplex can provide helpful insight on what is or is not identifiable using LLM judges. Our theoretical analysis uncovers a "phase transition" in ranking identifiability: for binary scoring systems, true rankings are identifiable even with weak judges under mild assumptions, while rankings become non-identifiable for three or more scoring levels even with infinite data, absent additional prior knowledge. This non-identifiability highlights how uncertainty in rankings stems from not only aleatoric uncertainty (i.e., inherent stochasticity in the data) but also epistemic uncertainty regarding which assumptions hold, an aspect that has received limited attention until now. To integrate both types of uncertainty, we use Bayesian inference to encode assumptions as priors and conduct sensitivity analysis of ranking estimates and credible intervals. Empirical evaluations across multiple benchmarks demonstrate that Bayesian inference yields more accurate rankings and substantially improves coverage rates. These results underscore the importance of taking a more holistic approach to uncertainty quantification when using LLMs as judges.

We propose transferability from Large Geometric Vicinity (LGV), a new technique to increase the transferability of black-box adversarial attacks. LGV starts from a pretrained surrogate model and collects multiple weight sets from a few additional training epochs with a constant and high learning rate. LGV exploits two geometric properties that we relate to transferability. First, models that belong to a wider weight optimum are better surrogates. Second, we identify a subspace able to generate an effective surrogate ensemble among this wider optimum. Through extensive experiments, we show that LGV alone outperforms all (combinations of) four established test-time transformations by 1.8 to 59.9 percentage points. Our findings shed new light on the importance of the geometry of the weight space to explain the transferability of adversarial examples.

Plane Geometry Diagram Synthesis has been a crucial task in computer graphics, with applications ranging from educational tools to AI-driven mathematical reasoning. Traditionally, we rely on manual tools (e.g., Matplotlib and GeoGebra) to generate precise diagrams, but this usually requires huge, complicated calculations. Recently, researchers start to work on model-based methods (e.g., Stable Diffusion and GPT5) to automatically generate diagrams, saving operational cost but usually suffering from limited realism and insufficient accuracy. In this paper, we propose a novel framework GeoSDF, to automatically generate diagrams efficiently and accurately with Signed Distance Field (SDF). Specifically, we first represent geometric elements (e.g., points, segments, and circles) in the SDF, then construct a series of constraint functions to represent geometric relationships. Next, we optimize those constructed constraint functions to get an optimized field of both elements and constraints. Finally, by rendering the optimized field, we can obtain the synthesized diagram. In our GeoSDF, we define a symbolic language to represent geometric elements and constraints, and our synthesized geometry diagrams can be self-verified in the SDF, ensuring both mathematical accuracy and visual plausibility. In experiments, through both qualitative and quantitative analysis, GeoSDF synthesized both normal high-school level and IMO-level geometry diagrams. We achieve 88.67\% synthesis accuracy by human evaluation in the IMO problem set. Furthermore, we obtain a very high accuracy of solving geometry problems (over 95\% while the current SOTA accuracy is around 75%) by leveraging our self-verification property. All of these demonstrate the advantage of GeoSDF, paving the way for more sophisticated, accurate, and flexible generation of geometric diagrams for a wide array of applications.

Every generative model for crystalline materials harbors a critical structure size beyond which its outputs quietly become unreliable -- we call this the extrapolation frontier. Despite its direct consequences for nanomaterial design, this frontier has never been systematically measured. We introduce RADII, a radius-resolved benchmark of {sim}75,000 nanoparticle structures (55-11,298 atoms) that treats radius as a continuous scaling knob to trace generation quality from in-distribution to out-of-distribution regimes under leakage-free splits. RADII provides frontier-specific diagnostics: per-radius error profiles pinpoint each architecture's scaling ceiling, surface-interior decomposition tests whether failures originate at boundaries or in bulk, and cross-metric failure sequencing reveals which aspect of structural fidelity breaks first. Benchmarking five state-of-the-art architectures, we find that: (i) all models degrade by {sim}13% in global positional error beyond training radii, yet local bond fidelity diverges wildly across architectures -- from near-zero to over 2times collapse; (ii) no two architectures share the same failure sequence, revealing the frontier as a multi-dimensional surface shaped by model family; and (iii) well-behaved models obey a power-law scaling exponent αapprox 1/3 whose in-distribution fit accurately predicts out-of-distribution error, making their frontiers quantitatively forecastable. These findings establish output scale as a first-class evaluation axis for geometric generative models. The dataset and code are available at https://github.com/KurbanIntelligenceLab/RADII.

As the issue of robustness in AI systems becomes vital, statistical learning techniques that are reliable even in presence of partly contaminated data have to be developed. Preference data, in the form of (complete) rankings in the simplest situations, are no exception and the demand for appropriate concepts and tools is all the more pressing given that technologies fed by or producing this type of data (e.g. search engines, recommending systems) are now massively deployed. However, the lack of vector space structure for the set of rankings (i.e. the symmetric group S_n) and the complex nature of statistics considered in ranking data analysis make the formulation of robustness objectives in this domain challenging. In this paper, we introduce notions of robustness, together with dedicated statistical methods, for Consensus Ranking the flagship problem in ranking data analysis, aiming at summarizing a probability distribution on S_n by a median ranking. Precisely, we propose specific extensions of the popular concept of breakdown point, tailored to consensus ranking, and address the related computational issues. Beyond the theoretical contributions, the relevance of the approach proposed is supported by an experimental study.

Large Language Models frequently hallucinate in precision-critical domains such as technical diagramming and mechanical design, where outputs must satisfy strict geometric constraints. We study open-ended geometric synthesis from natural language: translating free-form descriptions into precise constructions whose entities must simultaneously satisfy dozens of interacting constraints. To make this tractable, we release PyGeoX, a programmable geometric DSL that compiles declarative constraints into a differentiable loss, and PyGeoX-Bench, a stratified suite of 300 problems with per-constraint verifiable rewards. Using PyGeoX as a verifier, we identify a failure mode we call Outlier Gradient Masking: under global-norm rewards (any scheme that aggregates residuals through a single norm, for example, exp(-MSE)), a single outlier constraint can nullify the learning signal across all others. To address this, we propose Saturating Additive Rewards (SAR), which decompose the reward into bounded per-constraint terms, preserving partial progress and ensuring consistent gradients even under severe violations. Against MSE-based rewards, the natural baseline for geometry solvers, SAR improves the hard-tier solving rate by 2.3times, and the resulting 8B model is competitive with much larger frontier systems on this benchmark. We release the engine, benchmark, and data at https://github.com/Huawei-AI4Math/PyGeoX.

Latent variable collaborative filtering methods have been a standard approach to modelling user-click interactions due to their simplicity and effectiveness. However, there is limited work on analyzing the mathematical properties of these methods in particular on preventing the overfitting towards the identity, and such methods typically utilize loss functions that overlook the geometry between items. In this work, we introduce a notion of generalization gap in collaborative filtering and analyze this with respect to latent collaborative filtering models. We present a geometric upper bound that gives rise to loss functions, and a way to meaningfully utilize the geometry of item-metadata to improve recommendations. We show how these losses can be minimized and gives the recipe to a new latent collaborative filtering algorithm, which we refer to as GeoCF, due to the geometric nature of our results. We then show experimentally that our proposed GeoCF algorithm can outperform other all existing methods on the Movielens20M and Netflix datasets, as well as two large-scale internal datasets. In summary, our work proposes a theoretically sound method which paves a way to better understand generalization of collaborative filtering at large.

Recent incidents involving LLMs used for mental-health support reveal a critical evaluation gap: surface-level safety scores do not capture how models behave across realistic, emotionally sensitive interactions over time. Existing benchmarks measure knowledge, safety, or static response quality, but miss whether LLM interactions help users keep reflecting, coping, and making decisions themselves. We formalize this missing dimension as COGNITIVE ATROPHY, a process-level behavioural measure in AI-mediated mental-health support distinct from safety and helpfulness. To measure it, we introduce COGNITIVE ATROPHY BENCH, a clinically grounded benchmark built from 1,576 fully human-generated counseling conversations, 15,680 turns, and 42,230 responses from five LLMs. Three clinical and neuropsychology experts developed a 20-attribute schema spanning user context, response behaviour, and global risk flags; six trained clinical reviewers applied it with span-grounded evidence, producing 5,324 reviewer judgments. We further introduce the User-Input Risk Index (UIRI), the Cognitive Atrophy Risk Index (ARI), and trajectory summaries. Across five LLMs, models show a consistent moderate-to-high level of atrophy-aligned behaviour across single and multi-turn settings. While models generally respond to overt safety cues, they adapt less reliably when users seek solutions or decisions. The dominant recurring patterns are directive advice, problem-solving, recommendation responses, topic shifts, and forms of validation that may reinforce dependence rather than reflection. Our work makes COGNITIVE ATROPHY measurable and provides a foundation for auditing model behaviour in sensitive LLM conversations.

Magnitude of a finite metric space and the related notion of magnitude functions on metric spaces is an active area of research in algebraic topology. Magnitude originally arose in the context of biology, where it represents the number of effective species in an environment; when applied to a one-parameter family of metric spaces tX with scale parameter t, the magnitude captures much of the underlying geometry of the space. Prior work has mostly focussed on properties of magnitude in a global sense; in this paper we restrict the sets to finite subsets of Euclidean space and investigate its individual components. We give an explicit formula for the corrected inclusion-exclusion principle, and define a quantity associated with each point, called the moment which gives an intrinsic ordering to the points. We exploit this in order to form an algorithm which approximates the convex hull.

Large-scale AI training is now fundamentally a distributed systems problem, and hardware failures have become routine operating conditions rather than rare exceptions. Public operational evidence from production training clusters, however, remains scarce. This technical report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The cluster operates within a cross-organizational environment in which five parties (SKT, Upstage, Lablup, NVIDIA Korea, and VAST Data) share a unified monitoring pipeline. This arrangement enabled joint diagnosis of a 60-node-scale storage I/O bottleneck that did not appear at 2-4-node scale, a production-scale phenomenon no single team could isolate alone. Drawing on a months-long pre-training campaign, we perform three quantitative analyses yielding four findings. First, statistical analysis over 751 Prometheus metrics and 10 XID-identified GPU failures achieves a 10/10 detection rate (2/10 pre-XID) at ~0.84 false positives per day. No single metric is consistently dominant across failure types, motivating a multi-signal detection strategy. Second, profiling 523 checkpoint events along the GPU VRAM to NFS path attributes the "bandwidth paradox" (1.4-10.4% utilization of 200 Gbps RoCE) to saturation of the 128-slot NFS RPC layer. Third, multi-node failure response shows concentrated exclusions (top 3 of 63 nodes account for >50% of all exclusions) and an auto-retry chain success rate of 33.3% over 12 chains (73 attempts), 2.7x the 12.5% manual recovery rate; the median retry interval is 11 min (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

A triangular mesh is one of the most popular 3D data representations. As such, the deployment of deep neural networks for mesh processing is widely spread and is increasingly attracting more attention. However, neural networks are prone to adversarial attacks, where carefully crafted inputs impair the model's functionality. The need to explore these vulnerabilities is a fundamental factor in the future development of 3D-based applications. Recently, mesh attacks were studied on the semantic level, where classifiers are misled to produce wrong predictions. Nevertheless, mesh surfaces possess complex geometric attributes beyond their semantic meaning, and their analysis often includes the need to encode and reconstruct the geometry of the shape. We propose a novel framework for a geometric adversarial attack on a 3D mesh autoencoder. In this setting, an adversarial input mesh deceives the autoencoder by forcing it to reconstruct a different geometric shape at its output. The malicious input is produced by perturbing a clean shape in the spectral domain. Our method leverages the spectral decomposition of the mesh along with additional mesh-related properties to obtain visually credible results that consider the delicacy of surface distortions. Our code is publicly available at https://github.com/StolikTomer/SAGA.

The increasing population of objects in geostationary orbit has raised concerns about the potential risks posed by debris clouds resulting from fragmentation. The short-term evolution and associated hazards of debris generated by collisions in the geostationary region is investigated in this study. The initial distribution of two debris clouds is modeled using a single probability density function.The combined distribution of the evolved clouds is determined by solving boundary value problems.The risks associated with these debris clouds are evaluated by calculating the instantaneous impact rate and cumulative collision probability.The probability of collisions with millimeter-sized fragments may increase to 1% within 36 hours, while the probability of collisions with fragments 5 cm or larger is approximately 10^{-5}.These findings underscore the vulnerability of the geostationary region to space traffic accidents.

When learning simulations for modeling physical phenomena in industrial designs, geometrical variabilities are of prime interest. While classical regression techniques prove effective for parameterized geometries, practical scenarios often involve the absence of shape parametrization during the inference stage, leaving us with only mesh discretizations as available data. Learning simulations from such mesh-based representations poses significant challenges, with recent advances relying heavily on deep graph neural networks to overcome the limitations of conventional machine learning approaches. Despite their promising results, graph neural networks exhibit certain drawbacks, including their dependency on extensive datasets and limitations in providing built-in predictive uncertainties or handling large meshes. In this work, we propose a machine learning method that do not rely on graph neural networks. Complex geometrical shapes and variations with fixed topology are dealt with using well-known mesh morphing onto a common support, combined with classical dimensionality reduction techniques and Gaussian processes. The proposed methodology can easily deal with large meshes without the need for explicit shape parameterization and provides crucial predictive uncertainties, which are essential for informed decision-making. In the considered numerical experiments, the proposed method is competitive with respect to existing graph neural networks, regarding training efficiency and accuracy of the predictions.

Selective Classification, wherein models can reject low-confidence predictions, promises reliable translation of machine-learning based classification systems to real-world scenarios such as clinical diagnostics. While current evaluation of these systems typically assumes fixed working points based on pre-defined rejection thresholds, methodological progress requires benchmarking the general performance of systems akin to the AUROC in standard classification. In this work, we define 5 requirements for multi-threshold metrics in selective classification regarding task alignment, interpretability, and flexibility, and show how current approaches fail to meet them. We propose the Area under the Generalized Risk Coverage curve (AUGRC), which meets all requirements and can be directly interpreted as the average risk of undetected failures. We empirically demonstrate the relevance of AUGRC on a comprehensive benchmark spanning 6 data sets and 13 confidence scoring functions. We find that the proposed metric substantially changes metric rankings on 5 out of the 6 data sets.

Background: Reporting and Data Systems (RADS) standardize radiology risk communication but automated RADS assignment from narrative reports is challenging because of guideline complexity, output-format constraints, and limited benchmarking across RADS frameworks and model sizes. Purpose: To create RXL-RADSet, a radiologist-verified synthetic multi-RADS benchmark, and compare validity and accuracy of open-weight small language models (SLMs) with a proprietary model for RADS assignment. Materials and Methods: RXL-RADSet contains 1,600 synthetic radiology reports across 10 RADS (BI-RADS, CAD-RADS, GB-RADS, LI-RADS, Lung-RADS, NI-RADS, O-RADS, PI-RADS, TI-RADS, VI-RADS) and multiple modalities. Reports were generated by LLMs using scenario plans and simulated radiologist styles and underwent two-stage radiologist verification. We evaluated 41 quantized SLMs (12 families, 0.135-32B parameters) and GPT-5.2 under a fixed guided prompt. Primary endpoints were validity and accuracy; a secondary analysis compared guided versus zero-shot prompting. Results: Under guided prompting GPT-5.2 achieved 99.8% validity and 81.1% accuracy (1,600 predictions). Pooled SLMs (65,600 predictions) achieved 96.8% validity and 61.1% accuracy; top SLMs in the 20-32B range reached ~99% validity and mid-to-high 70% accuracy. Performance scaled with model size (inflection between <1B and >=10B) and declined with RADS complexity primarily due to classification difficulty rather than invalid outputs. Guided prompting improved validity (99.2% vs 96.7%) and accuracy (78.5% vs 69.6%) compared with zero-shot. Conclusion: RXL-RADSet provides a radiologist-verified multi-RADS benchmark; large SLMs (20-32B) can approach proprietary-model performance under guided prompting, but gaps remain for higher-complexity schemes.

While decision-based black-box adversarial attacks present a severe security threat, current methodologies suffer from fundamental limitations. Pixel-wise attacks frequently introduce unnatural, high-frequency visual artifacts, while latent-space frameworks are confined by the limited search space of low-dimensional manifolds and inherent reconstruction flaws. To resolve these limitations, we propose Latent Geometric Chords (LGC) for Query-Efficient Decision-Based Adversarial Attacks alongside a variant, LGC-H. At its core, LGC navigates decision boundaries by executing a curvature-aware geometric search within a compressed semantic manifold. To guarantee high visual fidelity and circumvent dimensionality bottlenecks, we introduce a Residual-based Adversarial Generation (RAG) mechanism. RAG isolates semantic perturbations as geometric chords and superimposes them directly onto the original source image. RAG substantially resolves baseline reconstruction flaws and effectively doubles the permissible search space dimensions. Experimental results demonstrate that LGC achieves robust cross-dataset transferability and substantially outperforms state-of-the-art baselines. Notably, our method, LGC, minimizes perturbation magnitudes while achieving state-of-the-art visual fidelity--with a Structural Similarity Index Measure (SSIM) exceeding 0.99 and a Learned Perceptual Image Patch Similarity (LPIPS) below 0.01 at 5000 queries--and sustaining high attack success rates under stringent perceptual constraints, successfully compromising adversarially trained robust models. The source code is available at: https://github.com/eihmuekhine/Latent-Geometric-Chords.

Many deployments must compare candidate language models for safety before a labeled benchmark exists for the relevant language, sector, or regulatory regime. We formalize this setting as benchmarkless comparative safety scoring and specify the contract under which a scenario-based audit can be interpreted as deployment evidence. Scores are valid only under a fixed scenario pack, rubric, auditor, judge, sampling configuration, and rerun budget. Because no labels are available, we replace ground-truth agreement with an instrumental-validity chain: responsiveness to a controlled safe-versus-abliterated contrast, dominance of target-driven variance over auditor and judge artifacts, and stability across reruns. We instantiate the chain in SimpleAudit, a local-first scoring instrument, and validate it on a Norwegian safety pack. Safe and abliterated targets separate with AUROC values between 0.89 and 1.00, target identity is the dominant variance component (η^2 approx 0.52), and severity profiles stabilize by ten reruns. Applying the same chain to Petri shows that it admits both tools. The substantial differences arise upstream of the chain, in claim-contract enforcement and deployment fit. A Norwegian public-sector procurement case comparing Borealis and Gemma 3 demonstrates the resulting evidence in practice: the safer model depends on scenario category and risk measure. Consequently, scores, matched deltas, critical rates, uncertainty, and the auditor and judge used must be reported together rather than collapsed into a single ranking.

Multimodal large language models (MLLMs) have made rapid progress in recent years, yet continue to struggle with low-level visual perception (LLVP) -- particularly the ability to accurately describe the geometric details of an image. This capability is crucial for applications in areas such as robotics, medical image analysis, and manufacturing. In this paper, we first introduce Geoperception, a benchmark designed to evaluate an MLLM's ability to accurately transcribe 2D geometric information from an image. Using this benchmark, we demonstrate the limitations of leading MLLMs, and then conduct a comprehensive empirical study to explore strategies for improving their performance on geometric tasks. Our findings highlight the benefits of certain model architectures, training techniques, and data strategies, including the use of high-fidelity synthetic data and multi-stage training with a data curriculum. Notably, we find that a data curriculum enables models to learn challenging geometry understanding tasks which they fail to learn from scratch. Leveraging these insights, we develop Euclid, a family of models specifically optimized for strong low-level geometric perception. Although purely trained on synthetic multimodal data, Euclid shows strong generalization ability to novel geometry shapes. For instance, Euclid outperforms the best closed-source model, Gemini-1.5-Pro, by up to 58.56% on certain Geoperception benchmark tasks and 10.65% on average across all tasks.

LLM-judged benchmarks are increasingly used to evaluate complex model behaviors, yet their design introduces failure modes absent in conventional ground-truth based benchmarks. We argue that without tight objectives and verifiable constructions, benchmark rankings can produce high-confidence rankings that are in fact largely noise. We introduce two mechanisms to diagnose these issues. Schematic adherence quantifies how much of a judge's overall verdict is explained by the explicit evaluation schema, revealing unexplained variance when judges deviate from their own rubric. Psychometric validity aggregates internal consistency and discriminant validity signals to quantify irreducible uncertainty in any benchmarking run. Applying these tools to Arena-Hard Auto, we find severe schema incoherence and factor collapse across popular judges: for example, unexplained variance exceeding 90 percent for DeepSeek-R1-32B and factor correlations above 0.93 for most criteria. We also show that the ELO-style aggregation used by Arena-Hard Auto collapses and masks genuine ranking uncertainty. Our results highlight design failures that undermine validity and offer actionable principles for building better-scoped, reliability-aware LLM-judged benchmarks. We release our code at https://anonymous.4open.science/r/judgment-to-noise-947D/README.md

This paper presents the computational challenge on differential geometry and topology that happened within the ICLR 2021 workshop "Geometric and Topological Representation Learning". The competition asked participants to provide creative contributions to the fields of computational geometry and topology through the open-source repositories Geomstats and Giotto-TDA. The challenge attracted 16 teams in its two month duration. This paper describes the design of the challenge and summarizes its main findings.

Machine learning has demonstrated remarkable performance over finite datasets, yet whether the scores over the fixed benchmarks can sufficiently indicate the model's performance in the real world is still in discussion. In reality, an ideal robust model will probably behave similarly to the oracle (e.g., the human users), thus a good evaluation protocol is probably to evaluate the models' behaviors in comparison to the oracle. In this paper, we introduce a new robustness measurement that directly measures the image classification model's performance compared with a surrogate oracle (i.e., a foundation model). Besides, we design a simple method that can accomplish the evaluation beyond the scope of the benchmarks. Our method extends the image datasets with new samples that are sufficiently perturbed to be distinct from the ones in the original sets, but are still bounded within the same image-label structure the original test image represents, constrained by a foundation model pretrained with a large amount of samples. As a result, our new method will offer us a new way to evaluate the models' robustness performance, free of limitations of fixed benchmarks or constrained perturbations, although scoped by the power of the oracle. In addition to the evaluation results, we also leverage our generated data to understand the behaviors of the model and our new evaluation strategies.

Current LLM safety benchmarks are predominantly English-centric and often rely on translation, failing to capture country-specific harms. Moreover, they rarely evaluate a model's ability to detect culturally embedded sensitivities as distinct from universal harms. We introduce XL-SafetyBench. a suite of 5,500 test cases across 10 country-language pairs, comprising a Jailbreak Benchmark of country-grounded adversarial prompts and a Cultural Benchmark where local sensitivities are embedded within innocuous requests. Each item is constructed via a multi-stage pipeline that combines LLM-assisted discovery, automated validation gates, and dual independent native-speaker annotators per country. To distinguish principled refusal from comprehension failure, we evaluate Attack Success Rate (ASR) alongside two complementary metrics we introduce: Neutral-Safe Rate (NSR) and Cultural Sensitivity Rate (CSR). Evaluating 10 frontier and 27 local LLMs reveals two key findings. First, jailbreak robustness and cultural awareness do not show a coupled relationship among frontier models, so a composite safety score obscures per-axis variation. Second, local models exhibit a near-linear ASR-NSR trade-off (r = -0.81), indicating that their apparent safety reflects generation failure rather than genuine alignment. XL-SafetyBench enables more nuanced, cross-cultural safety evaluation in the multilingual era.

Vision-language models (VLMs) achieve strong performance on standard, high-quality datasets, but we still do not fully understand how they perform under real-world image distortions. We present VLM-RobustBench, a benchmark spanning 49 augmentation types across noise, blur, weather, digital, and geometric perturbations, evaluated under graded severities (low/mid/high) and binary transforms, yielding 133 corrupted settings. We evaluate VLMs from four families (Qwen, InternVL, Molmo, Gemma) on two complementary benchmarks: MMBench (visually grounded) and MMMU-Pro (reasoning-oriented). Our results reveal that visual severity is a weak predictor of difficulty: low-severity spatial perturbations often degrade performance more than visually severe photometric corruptions. In particular, low-severity glass_blur reduces MMBench accuracy by about 8 pp on average across models, while the largest drops arise from resampling and geometric distortions (e.g., upsample, elastic_transform), reaching up to 34 pp. Overall, our findings suggest current VLMs are semantically strong but spatially fragile, motivating the definition of novel robustness evaluation protocols and training regimes that emphasize resampling and geometric invariances.

Multivariate probabilistic time series forecasts are commonly evaluated via proper scoring rules, i.e., functions that are minimal in expectation for the ground-truth distribution. However, this property is not sufficient to guarantee good discrimination in the non-asymptotic regime. In this paper, we provide the first systematic finite-sample study of proper scoring rules for time-series forecasting evaluation. Through a power analysis, we identify the "region of reliability" of a scoring rule, i.e., the set of practical conditions where it can be relied on to identify forecasting errors. We carry out our analysis on a comprehensive synthetic benchmark, specifically designed to test several key discrepancies between ground-truth and forecast distributions, and we gauge the generalizability of our findings to real-world tasks with an application to an electricity production problem. Our results reveal critical shortcomings in the evaluation of multivariate probabilistic forecasts as commonly performed in the literature.

We present EBench, a simulation benchmark that diagnoses generalist mobile manipulation policies beyond a single success-rate scalar. EBench comprises 26 diverse and challenging manipulation tasks annotated along 5 capability dimensions and 4 generalization dimensions. We evaluate state-of-the-art generalist manipulation models including π_0, π_{0.5}, XVLA, and InternVLA-A1, and reveal that models with near success rates exhibit strikingly different capability profiles: π_{0.5} achieves the highest test success rate and the best train--test retention, whereas InternVLA-A1 dominates mobile manipulation but collapses on dexterous tasks, and XVLA exhibits strengths on a disjoint set of atomic skills compared to other policies. Beyond capability profiling, EBench analyzes the generalization ability from 4 representative perspectives, identifying the impact of different distribution shift factors. The results reveal strengths and weaknesses of models behind an overall score. We hope this benchmark offers a broad set of diagnostic signals to guide iteration on generalist manipulation models.

Autonomous language-model agents increasingly rely on installable skills and tools to complete user tasks. Static skill auditing can expose capability surface before deployment, but it cannot determine whether a particular invocation is unsafe under the current user request and runtime context. We therefore study skill invocation auditing as a continuous-risk estimation problem: given a user request, candidate skill, and runtime context, predict a score that supports ranking and triage before a hard intervention is applied. We introduce STARS, which combines a static capability prior, a request-conditioned invocation risk model, and a calibrated risk-fusion policy. To evaluate this setting, we construct SIA-Bench, a benchmark of 3,000 invocation records with group-safe splits, lineage metadata, runtime context, canonical action labels, and derived continuous-risk targets. On a held-out split of indirect prompt injection attacks, calibrated fusion reaches 0.439 high-risk AUPRC, improving over 0.405 for the contextual scorer and 0.380 for the strongest static baseline, while the contextual scorer remains better calibrated with 0.289 expected calibration error. On the locked in-distribution test split, gains are smaller and static priors remain useful. The resulting claim is therefore narrower: request-conditioned auditing is most valuable as an invocation-time risk-scoring and triage layer rather than as a replacement for static screening. Code is available at https://github.com/123zgj123/STARS.

Safety alignment in Large Language Models is critical for healthcare; however, reliance on binary refusal boundaries often results in over-refusal of benign queries or unsafe compliance with harmful ones. While existing benchmarks measure these extremes, they fail to evaluate Safe Completion: the model's ability to maximise helpfulness on dual-use or borderline queries by providing safe, high-level guidance without crossing into actionable harm. We introduce Health-ORSC-Bench, the first large-scale benchmark designed to systematically measure Over-Refusal and Safe Completion quality in healthcare. Comprising 31,920 benign boundary prompts across seven health categories (e.g., self-harm, medical misinformation), our framework uses an automated pipeline with human validation to test models at varying levels of intent ambiguity. We evaluate 30 state-of-the-art LLMs, including GPT-5 and Claude-4, revealing a significant tension: safety-optimised models frequently refuse up to 80\% of "Hard" benign prompts, while domain-specific models often sacrifice safety for utility. Our findings demonstrate that model family and size significantly influence calibration: larger frontier models (e.g., GPT-5, Llama-4) exhibit "safety-pessimism" and higher over-refusal than smaller or MoE-based counterparts (e.g., Qwen-3-Next), highlighting that current LLMs struggle to balance refusal and compliance. Health-ORSC-Bench provides a rigorous standard for calibrating the next generation of medical AI assistants toward nuanced, safe, and helpful completions. The code and data will be released upon acceptance. red{Warning: Some contents may include toxic or undesired contents.}

Deep Neural Networks are highly susceptible to shortcut learning, frequently memorizing low-dimensional spurious correlations instead of underlying causal mechanisms. This phenomenon not only degrades out-of-distribution robustness but also induces severe demographic biases in sensitive applications. In this paper, we propose a geometric a priori methodology to mitigate shortcut learning. By deploying a zero-hidden-layer (N=1) Topological Auditor, we mathematically isolate features that monopolize the gradient without human intervention. We empirically demonstrate a Capacity Phase Transition: once linear shortcuts are pruned, networks are forced to utilize higher geometric capacity (N geq 16) to curve the decision boundary and learn ethical representations. Our approach outperforms L1 Regularization -- which collapses into demographic bias -- and operates at a fraction of the computational cost of post-hoc methods like Just Train Twice (JTT), successfully reducing counterfactual gender vulnerability from 21.18\% to 7.66\%.

A growing literature in computational neuroscience leverages gradient descent and learning algorithms that approximate it to study synaptic plasticity in the brain. However, the vast majority of this work ignores a critical underlying assumption: the choice of distance for synaptic changes - i.e. the geometry of synaptic plasticity. Gradient descent assumes that the distance is Euclidean, but many other distances are possible, and there is no reason that biology necessarily uses Euclidean geometry. Here, using the theoretical tools provided by mirror descent, we show that the distribution of synaptic weights will depend on the geometry of synaptic plasticity. We use these results to show that experimentally-observed log-normal weight distributions found in several brain areas are not consistent with standard gradient descent (i.e. a Euclidean geometry), but rather with non-Euclidean distances. Finally, we show that it should be possible to experimentally test for different synaptic geometries by comparing synaptic weight distributions before and after learning. Overall, our work shows that the current paradigm in theoretical work on synaptic plasticity that assumes Euclidean synaptic geometry may be misguided and that it should be possible to experimentally determine the true geometry of synaptic plasticity in the brain.

Landslide monitoring is essential for understanding geohazards and mitigating associated risks. However, existing point cloud-based methods typically rely on either geometric or radiometric information and often yield sparse or non-3D displacement estimates. In this paper, we propose a hierarchical partition-based coarse-to-fine approach that fuses 3D point clouds and co-registered RGB images to estimate dense 3D displacement vector fields. We construct patch-level matches using both 3D geometry and 2D image features. These matches are refined via geometric consistency checks, followed by rigid transformation estimation per match. Experimental results on two real-world landslide datasets demonstrate that our method produces 3D displacement estimates with high spatial coverage (79% and 97%) and high accuracy. Deviations in displacement magnitude with respect to external measurements (total station or GNSS observations) are 0.15 m and 0.25 m on the two datasets, respectively, and only 0.07 m and 0.20 m compared to manually derived references. These values are below the average scan resolutions (0.08 m and 0.30 m). Our method outperforms the state-of-the-art method F2S3 in spatial coverage while maintaining comparable accuracy. Our approach offers a practical and adaptable solution for TLS-based landslide monitoring and is extensible to other types of point clouds and monitoring tasks. Our example data and source code are publicly available at https://github.com/zhaoyiww/fusion4landslide.

Recovering editable CAD programs from images or 3D observations is central to AI-assisted design, but progress is difficult to measure because existing evaluations are fragmented across datasets, modalities, and metrics. We introduce CADBench, a unified benchmark for multimodal CAD program generation. CADBench contains 18,000 evaluation samples spanning six benchmark families derived from DeepCAD, Fusion 360, ABC, MCB, and Objaverse; five input modalities including clean meshes, noisy meshes, single-view renders, photorealistic renders, and multi-view renders; and six metrics covering geometric fidelity, executability, and program compactness. STEP-based families are stratified by B-rep face count and all families are diversity-sampled to support controlled analysis across complexity and object variation. We benchmark eleven CAD-specialized and general-purpose vision-language systems, generating more than 1.4 million CAD programs. Under idealized inputs, specialized mesh-to-CAD models substantially outperform code-generating VLMs, which remain far from reliable CAD program reconstruction. CADBench further reveals three recurring failure modes: reconstruction quality degrades with geometric complexity, CAD-specialized models can be brittle under modality shift, and model rankings change across metrics. Together, these results position CADBench as a diagnostic testbed for measuring progress in editable 3D reconstruction and multimodal CAD understanding. The benchmark is publicly available at https://huggingface.co/datasets/DeCoDELab/CADBench.

Automatic math problem solving has recently attracted increasing attention as a long-standing AI benchmark. In this paper, we focus on solving geometric problems, which requires a comprehensive understanding of textual descriptions, visual diagrams, and theorem knowledge. However, the existing methods were highly dependent on handcraft rules and were merely evaluated on small-scale datasets. Therefore, we propose a Geometric Question Answering dataset GeoQA, containing 4,998 geometric problems with corresponding annotated programs, which illustrate the solving process of the given problems. Compared with another publicly available dataset GeoS, GeoQA is 25 times larger, in which the program annotations can provide a practical testbed for future research on explicit and explainable numerical reasoning. Moreover, we introduce a Neural Geometric Solver (NGS) to address geometric problems by comprehensively parsing multimodal information and generating interpretable programs. We further add multiple self-supervised auxiliary tasks on NGS to enhance cross-modal semantic representation. Extensive experiments on GeoQA validate the effectiveness of our proposed NGS and auxiliary tasks. However, the results are still significantly lower than human performance, which leaves large room for future research. Our benchmark and code are released at https://github.com/chen-judge/GeoQA .

Federated learning has exhibited vulnerabilities to Byzantine attacks, where the Byzantine attackers can send arbitrary gradients to a central server to destroy the convergence and performance of the global model. A wealth of robust AGgregation Rules (AGRs) have been proposed to defend against Byzantine attacks. However, Byzantine clients can still circumvent robust AGRs when data is non-Identically and Independently Distributed (non-IID). In this paper, we first reveal the root causes of performance degradation of current robust AGRs in non-IID settings: the curse of dimensionality and gradient heterogeneity. In order to address this issue, we propose GAS, a \shorten approach that can successfully adapt existing robust AGRs to non-IID settings. We also provide a detailed convergence analysis when the existing robust AGRs are combined with GAS. Experiments on various real-world datasets verify the efficacy of our proposed GAS. The implementation code is provided in https://github.com/YuchenLiu-a/byzantine-gas.

We present a computational framework that transforms single images into 3D physical objects. The visual geometry of a physical object in an image is determined by three orthogonal attributes: mechanical properties, external forces, and rest-shape geometry. Existing single-view 3D reconstruction methods often overlook this underlying composition, presuming rigidity or neglecting external forces. Consequently, the reconstructed objects fail to withstand real-world physical forces, resulting in instability or undesirable deformation -- diverging from their intended designs as depicted in the image. Our optimization framework addresses this by embedding physical compatibility into the reconstruction process. We explicitly decompose the three physical attributes and link them through static equilibrium, which serves as a hard constraint, ensuring that the optimized physical shapes exhibit desired physical behaviors. Evaluations on a dataset collected from Objaverse demonstrate that our framework consistently enhances the physical realism of 3D models over existing methods. The utility of our framework extends to practical applications in dynamic simulations and 3D printing, where adherence to physical compatibility is paramount.

This paper presents GPSM4K, a comprehensive geometry multimodal dataset tailored to augment the problem-solving capabilities of Large Vision Language Models (LVLMs). GPSM4K encompasses 2157 multimodal question-answer pairs manually extracted from mathematics textbooks spanning grades 7-12 and is further augmented to 5340 problems, consisting of both numerical and theorem-proving questions. In contrast to PGPS9k, Geometry3K, and Geo170K which feature only objective-type questions, GPSM4K offers detailed step-by-step solutions in a consistent format, facilitating a comprehensive evaluation of problem-solving approaches. This dataset serves as an excellent benchmark for assessing the geometric reasoning capabilities of LVLMs. Evaluation of our test set shows that there is scope for improvement needed in open-source language models in geometry problem-solving. Finetuning on our training set increases the geometry problem-solving capabilities of models. Further, We also evaluate the effectiveness of techniques such as image captioning and Retrieval Augmentation generation (RAG) on model performance. We leveraged LLM to automate the task of final answer evaluation by providing ground truth and predicted solutions. This research will help to assess and improve the geometric reasoning capabilities of LVLMs.

Large language models (LLMs) show inherent brittleness in their safety mechanisms, as evidenced by their susceptibility to jailbreaking and even non-malicious fine-tuning. This study explores this brittleness of safety alignment by leveraging pruning and low-rank modifications. We develop methods to identify critical regions that are vital for safety guardrails, and that are disentangled from utility-relevant regions at both the neuron and rank levels. Surprisingly, the isolated regions we find are sparse, comprising about 3% at the parameter level and 2.5% at the rank level. Removing these regions compromises safety without significantly impacting utility, corroborating the inherent brittleness of the model's safety mechanisms. Moreover, we show that LLMs remain vulnerable to low-cost fine-tuning attacks even when modifications to the safety-critical regions are restricted. These findings underscore the urgent need for more robust safety strategies in LLMs.

The robustness of neural networks to adversarial examples has received great attention due to security implications. Despite various attack approaches to crafting visually imperceptible adversarial examples, little has been developed towards a comprehensive measure of robustness. In this paper, we provide a theoretical justification for converting robustness analysis into a local Lipschitz constant estimation problem, and propose to use the Extreme Value Theory for efficient evaluation. Our analysis yields a novel robustness metric called CLEVER, which is short for Cross Lipschitz Extreme Value for nEtwork Robustness. The proposed CLEVER score is attack-agnostic and computationally feasible for large neural networks. Experimental results on various networks, including ResNet, Inception-v3 and MobileNet, show that (i) CLEVER is aligned with the robustness indication measured by the ell_2 and ell_infty norms of adversarial examples from powerful attacks, and (ii) defended networks using defensive distillation or bounded ReLU indeed achieve better CLEVER scores. To the best of our knowledge, CLEVER is the first attack-independent robustness metric that can be applied to any neural network classifier.

Large language models have demonstrated remarkable performance in a wide range of medical benchmarks. Yet underneath the seemingly promising results lie salient growth areas, especially in cutting-edge frontiers such as multimodal reasoning. In this paper, we introduce a series of adversarial stress tests to systematically assess the robustness of flagship models and medical benchmarks. Our study reveals prevalent brittleness in the presence of simple adversarial transformations: leading systems can guess the right answer even with key inputs removed, yet may get confused by the slightest prompt alterations, while fabricating convincing yet flawed reasoning traces. Using clinician-guided rubrics, we demonstrate that popular medical benchmarks vary widely in what they truly measure. Our study reveals significant competency gaps of frontier AI in attaining real-world readiness for health applications. If we want AI to earn trust in healthcare, we must demand more than leaderboard wins and must hold AI systems accountable to ensure robustness, sound reasoning, and alignment with real medical demands.

The lack of standardized robustness metrics and the widespread reliance on numerous unrelated benchmark datasets for testing have created a gap between academically validated robust models and their often problematic practical adoption. To address this, we introduce XIMAGENET-12, an explainable benchmark dataset with over 200K images and 15,600 manual semantic annotations. Covering 12 categories from ImageNet to represent objects commonly encountered in practical life and simulating six diverse scenarios, including overexposure, blurring, color changing, etc., we further propose a novel robustness criterion that extends beyond model generation ability assessment. This benchmark dataset, along with related code, is available at https://sites.google.com/view/ximagenet-12/home. Researchers and practitioners can leverage this resource to evaluate the robustness of their visual models under challenging conditions and ultimately benefit from the demands of practical computer vision systems.

Safety performance evaluation is critical for developing and deploying connected and automated vehicles (CAVs). One prevailing way is to design testing scenarios using prior knowledge of CAVs, test CAVs in these scenarios, and then evaluate their safety performances. However, significant differences between CAVs and prior knowledge could severely reduce the evaluation efficiency. Towards addressing this issue, most existing studies focus on the adaptive design of testing scenarios during the CAV testing process, but so far they cannot be applied to high-dimensional scenarios. In this paper, we focus on the adaptive safety performance evaluation by leveraging the testing results, after the CAV testing process. It can significantly improve the evaluation efficiency and be applied to high-dimensional scenarios. Specifically, instead of directly evaluating the unknown quantity (e.g., crash rates) of CAV safety performances, we evaluate the differences between the unknown quantity and known quantity (i.e., control variates). By leveraging the testing results, the control variates could be well designed and optimized such that the differences are close to zero, so the evaluation variance could be dramatically reduced for different CAVs. To handle the high-dimensional scenarios, we propose the sparse control variates method, where the control variates are designed only for the sparse and critical variables of scenarios. According to the number of critical variables in each scenario, the control variates are stratified into strata and optimized within each stratum using multiple linear regression techniques. We justify the proposed method's effectiveness by rigorous theoretical analysis and empirical study of high-dimensional overtaking scenarios.

Adversarial threats against LLMs are escalating faster than current defenses can adapt. We expose a critical geometric blind spot in alignment: adversarial prompts exploit latent camouflage, embedding perilously close to the safe representation manifold while encoding unsafe intent thereby evading surface level defenses like Direct Preference Optimization (DPO), which remain blind to the latent geometry. We introduce ALKALI, the first rigorously curated adversarial benchmark and the most comprehensive to date spanning 9,000 prompts across three macro categories, six subtypes, and fifteen attack families. Evaluation of 21 leading LLMs reveals alarmingly high Attack Success Rates (ASRs) across both open and closed source models, exposing an underlying vulnerability we term latent camouflage, a structural blind spot where adversarial completions mimic the latent geometry of safe ones. To mitigate this vulnerability, we introduce GRACE - Geometric Representation Aware Contrastive Enhancement, an alignment framework coupling preference learning with latent space regularization. GRACE enforces two constraints: latent separation between safe and adversarial completions, and adversarial cohesion among unsafe and jailbreak behaviors. These operate over layerwise pooled embeddings guided by a learned attention profile, reshaping internal geometry without modifying the base model, and achieve up to 39% ASR reduction. Moreover, we introduce AVQI, a geometry aware metric that quantifies latent alignment failure via cluster separation and compactness. AVQI reveals when unsafe completions mimic the geometry of safe ones, offering a principled lens into how models internally encode safety. We make the code publicly available at https://anonymous.4open.science/r/alkali-B416/README.md.

Understanding how Large Language Models (LLMs) perform complex reasoning and their failure mechanisms is a challenge in interpretability research. To provide a measurable geometric analysis perspective, we define the concept of the Reasoning Manifold, a latent low-dimensional geometric structure formed by the internal representations corresponding to all correctly reasoned generations. This structure can be conceptualized as the embodiment of the effective thinking paths that the model has learned to successfully solve a given task. Based on this concept, we build REMA, a framework that explains the origins of failures by quantitatively comparing the spatial relationships of internal model representations corresponding to both erroneous and correct reasoning samples. Specifically, REMA first quantifies the geometric deviation of each erroneous representation by calculating its k-nearest neighbors distance to the approximated manifold formed by correct representations, thereby providing a unified failure signal. It then localizes the divergence points where these deviations first become significant by tracking this deviation metric across the model's layers and comparing it against a baseline of internal fluctuations from correct representations, thus identifying where the reasoning chain begins to go off-track. Our extensive experiments on diverse language and multimodal models and tasks demonstrate the low-dimensional nature of the reasoning manifold and the high separability between erroneous and correct reasoning representations. The results also validate the effectiveness of the REMA framework in analyzing the origins of reasoning failures. This research connects abstract reasoning failures to measurable geometric deviations in representations, providing new avenues for in-depth understanding and diagnosis of the internal computational processes of black-box models.