Daily Papers

Heterogeneous LLM serving stacks split scheduling into two layers that optimize in isolation: model routers pick a model from quality and cost signals while ignoring instance load, and serving load balancers optimize queues while ignoring quality. We present RouteBalance, a serving-aware scheduling layer that fuses both into a single online assignment over concrete model instances, jointly trading off quality, latency, and cost. A batched in-process predictor stack and dead-reckoned instance state keep the joint decision cheap on the request hot path (approx32 ms at 12 req/s). On a 13-instance, 28-GPU heterogeneous cluster serving four model sizes, a single deployed RouteBalance stack traces the upper region of the three-way quality-cost-throughput frontier. Sweeping one weight vector reaches both the highest routing-decision quality (DeepEval 0.419, +0.013 over the strongest baseline, 95% CI [{+}0.005,{+}0.022]; the ordering holds when a second judge re-scores the actually served text) and, at its cost-priority corner, per-request cost that ties the cheapest baseline. With router engineering equalized against concurrent-scoring baseline variants we build, its balanced preset serves at 2.8 s and 30 req/s, leading 2.6 to 4.1times ahead of enhanced BEST-Route at high load. (Deploying those routers as published, one serial scoring call per request, makes them collapse 23times under load, a deployment-architecture effect we isolate separately, not the routing result.) A four-arm isolation shows the benefit follows from pricing latency at model-selection time; the learned predictors contribute calibration and SLO headroom rather than the headline frontier. Code: https://github.com/AKafakA/route-balance

Multimodal large language models (MLLMs) extend LLMs to handle images, videos, and audio by incorporating feature extractors and projection modules. However, these additional components -- combined with complex inference pipelines and heterogeneous workloads -- introduce significant inference overhead. Therefore, efficiently serving MLLMs remains a major challenge. Current tightly coupled serving architectures struggle to distinguish between mixed request types or adapt parallelism strategies to different inference stages, leading to increased time-to-first-token (TTFT) latency and poor resource utilization. To address this, we introduce Elastic Multimodal Parallelism (EMP), a new serving paradigm that elastically adapts to resource heterogeneity across request types and inference stages. Building upon EMP, we develop ElasticMM, an MLLM serving system that (1) separates requests into independent modality groups with dynamic resource allocation via a modality-aware load balancer; (2) decouples inference stages and enables parallelism adjustment and adaptive scaling via elastic partition scheduling; and (3) improves inference efficiency through unified multimodal prefix caching and non-blocking encoding. Experiments on diverse real-world datasets show that ElasticMM outperforms state-of-the-art (SOTA) serving systems, reducing TTFT by up to 4.2x and achieving 3.2-4.5x higher throughput while meeting service-level objectives (SLOs).

Large-scale expert parallelism (EP) is becoming pivotal for training and serving frontier MoE models, but it also amplifies device-level expert load imbalance into compute stragglers, token all-to-all bottlenecks, and activation-memory spikes. Existing balancers redistribute experts periodically based on historical load, which becomes unreliable for production deployments with non-stationary load patterns. We present UltraEP, the first exact-load, real-time balancer for large-EP MoE training and serving prefill on rack-scale nodes (RSNs). Leveraging the extended scale-up connectivity among dozens of GPUs within RSNs, UltraEP rebalances every microbatch and layer on critical paths, which requires nontrivial co-design of plan solving and expert replication communication to minimize exposed overhead. To this end, UltraEP eagerly reacts to post-gating load with an efficient quota-driven planner, and executes the resulting irregular expert-state transfers with RSN-native persistent tile streaming and relay-based fan-out mitigation. We evaluate UltraEP in a multi-RSN deployment of up to 256 GPUs, using cutting-edge MoE models from 106B to 671B parameters. Averaged across training and serving, UltraEP achieves 94.3% of the force-balanced ideal throughput, delivering 1.49times improvement over no-balancing, while reducing the final inter-rank imbalance from 1.30-4.01 to 1.01-1.04.

In LLM serving, reusing the KV cache of prompts across requests is critical for reducing TTFT and serving costs. Cache-affinity scheduling, which co-locates requests with the same prompt prefix to maximize KV cache reuse, often conflicts with load-balancing scheduling that distributes requests evenly across compute instances. Existing schedulers fail to reconcile this trade-off as they operate within a single mapping space, typically applying cache-affinity routing to a subset of requests and load-balanced routing to the rest, without a unified solution to achieve both goals. To address this limitation, we propose DualMap, a dual-mapping scheduling strategy for distributed LLM serving that achieves both cache affinity and load balancing. Its key idea is to map each request to two candidate instances via two independent hash functions based on the request prompt, then intelligently select the better candidate based on current system states. This design increases the likelihood that requests with shared prefixes are co-located, while evenly dispersing distinct prefixes across the cluster via ``the power of two choices''. To make DualMap robust under dynamic and skewed real-world workloads, we incorporate three techniques: 1) SLO-aware request routing, which prioritizes cache affinity but switches to load-aware scheduling when TTFT exceeds the SLO, enhancing load balance without sacrificing cache reuse; 2) hotspot-aware rebalancing, which dynamically migrates requests from overloaded to underloaded instances, mitigating hotspots and rebalancing the system; 3) lightweight dual-hash-ring scaling, which leverages a dual-hash-ring mapping to support fast and low-overhead instance scaling without costly global remapping. Experiments on real-world workloads show that DualMap improves effective request capacity by up to 2.25times under the same TTFT SLO constraints compared with SOTA work.

Transformers, driven by attention mechanisms, form the foundation of large language models (LLMs). As these models scale up, efficient GPU attention kernels become essential for high-throughput and low-latency inference. Diverse LLM applications demand flexible and high-performance attention solutions. We present FlashInfer: a customizable and efficient attention engine for LLM serving. FlashInfer tackles KV-cache storage heterogeneity using block-sparse format and composable formats to optimize memory access and reduce redundancy. It also offers a customizable attention template, enabling adaptation to various settings through Just-In-Time (JIT) compilation. Additionally, FlashInfer's load-balanced scheduling algorithm adjusts to dynamism of user requests while maintaining compatibility with CUDAGraph which requires static configuration. FlashInfer have been integrated into leading LLM serving frameworks like SGLang, vLLM and MLC-Engine. Comprehensive kernel-level and end-to-end evaluations demonstrate FlashInfer's ability to significantly boost kernel performance across diverse inference scenarios: compared to state-of-the-art LLM serving solutions, FlashInfer achieve 29-69% inter-token-latency reduction compared to compiler backends for LLM serving benchmark, 28-30% latency reduction for long-context inference, and 13-17% speedup for LLM serving with parallel generation.

Multi-provider LLM gateways reverse proxies that route, load-balance, and rate-limit requests across foundation-model APIs have become critical production infrastructure. Yet the failure modes specific to this architectural layer remain undocumented, scattered across issue trackers and post-mortems with no unifying framework. We introduce , a two-axis taxonomy that classifies failures by their origin layer (Network/Transport, Streaming/Protocol, State/Session, Model~Behavior, Governance/Cost) and their detectability (Loud vs.\ Silent). We populate this taxonomy with five verified catalog entries sourced from public bug reports and first-hand stress testing, each accompanied by a mechanistic root-cause analysis. Three entries include standalone reproduction scripts. Our principal finding is that the most operationally severe failures are silent: they return HTTP~200, pass every standard health check, and corrupt application state in ways that require semantic-level observability to detect. Two such silent failures a concurrency race condition causing history loss and a streaming index collision corrupting tool-call payloads were discovered first-hand during evaluation campaigns.

Quantization is a widely-used compression technology to reduce the overhead of serving large language models (LLMs) on terminal devices and in cloud data centers. However, prevalent quantization methods, such as 8-bit weight-activation or 4-bit weight-only quantization, achieve limited performance improvements due to poor support for low-precision (e.g., 4-bit) activation. This work, for the first time, realizes practical W4A4KV4 serving for LLMs, fully utilizing the INT4 tensor cores on modern GPUs and reducing the memory bottleneck caused by the KV cache. Specifically, we propose a novel fine-grained mixed-precision quantization algorithm (FMPQ) that compresses most activations into 4-bit with negligible accuracy loss. To support mixed-precision matrix multiplication for W4A4 and W4A8, we develop a highly optimized W4Ax kernel. Our approach introduces a novel mixed-precision data layout to facilitate access and fast dequantization for activation and weight tensors, utilizing the GPU's software pipeline to hide the overhead of data loading and conversion. Additionally, we propose fine-grained streaming multiprocessor (SM) scheduling to achieve load balance across different SMs. We integrate the optimized W4Ax kernel into our inference framework, COMET, and provide efficient management to support popular LLMs such as LLaMA-3-70B. Extensive evaluations demonstrate that, when running LLaMA family models on a single A100-80G-SMX4, COMET achieves a kernel-level speedup of 2.88times over cuBLAS and a 2.02 times throughput improvement compared to TensorRT-LLM from an end-to-end framework perspective.

Serving systems for Large Language Models (LLMs) are often optimized to improve quality of service (QoS) and throughput. However, due to the lack of open-source LLM serving workloads, these systems are frequently evaluated under unrealistic workload assumptions. Consequently, performance may degrade when systems are deployed in real-world scenarios. This work presents BurstGPT, an LLM serving workload with 10.31 million traces from regional Azure OpenAI GPT services over 213 days. BurstGPT captures LLM serving characteristics from user, model and system perspectives: (1) User request concurrency: burstiness variations of requests in Azure OpenAI GPT services, revealing diversified concurrency patterns in different services and model types. (2) User conversation patterns: counts and intervals within conversations for service optimizations. (3) Model response lengths: auto-regressive serving processes of GPT models, showing statistical relations between requests and their responses. (4) System response failures: failures of conversation and API services, showing intensive resource needs and limited availability of LLM services in Azure. The details of the characteristics can serve multiple purposes in LLM serving optimizations, such as system evaluation and trace provisioning. In our demo evaluation with BurstGPT, frequent variations in BurstGPT reveal declines in efficiency, stability, or reliability in realistic LLM serving. We identify that the generalization of KV cache management, scheduling and disaggregation optimizations can be improved under realistic workload evaluations. BurstGPT is publicly available now at https://github.com/HPMLL/BurstGPT and is widely used to develop prototypes of LLM serving frameworks in the industry.

Many applications must provide low-latency LLM service to users or risk unacceptable user experience. However, over-provisioning resources to serve fluctuating request patterns is often prohibitively expensive. In this work, we present a best-effort serving system that employs deep reinforcement learning to adjust service quality based on the task distribution and system load. Our best-effort system can maintain availability with over 10x higher client request rates, serves above 96% of peak performance 4.1x more often, and serves above 98% of peak performance 2.3x more often than static serving on unpredictable workloads. Our learned router is robust to shifts in both the arrival and task distribution. Compared to static serving, learned best-effort serving allows for cost-efficient serving through increased hardware utility. Additionally, we argue that learned best-effort LLM serving is applicable in wide variety of settings and provides application developers great flexibility to meet their specific needs.

Serving numerous users and requests concurrently requires good fairness in Large Language Models (LLMs) serving system. This ensures that, at the same cost, the system can meet the Service Level Objectives (SLOs) of more users , such as time to first token (TTFT) and time between tokens (TBT), rather than allowing a few users to experience performance far exceeding the SLOs. To achieve better fairness, the preemption-based scheduling policy dynamically adjusts the priority of each request to maintain balance during runtime. However, existing systems tend to overly prioritize throughput, overlooking the overhead caused by preemption-induced context switching, which is crucial for maintaining fairness through priority adjustments. In this work, we identify three main challenges that result in this overhead. 1) Inadequate I/O utilization. 2) GPU idleness. 3) Unnecessary I/O transmission during multi-turn conversations. Our key insight is that the block-based KV cache memory policy in existing systems, while achieving near-zero memory waste, leads to discontinuity and insufficient granularity in the KV cache memory. To respond, we introduce FastSwitch, a fairness-aware serving system that not only aligns with existing KV cache memory allocation policy but also mitigates context switching overhead. Our evaluation shows that FastSwitch outperforms the state-of-the-art LLM serving system vLLM with speedups of 1.4-11.2x across different tail TTFT and TBT.

In prefill-decode (PD) disaggregated LLM serving, each request is assigned to a decode worker after prefill. Existing decode routers balance only load; for mixture-of-experts (MoE) models this is incomplete: equally loaded workers can differ in latency, since each decode step loads the weights of every distinct expert its batch activates. We present ELDR, an expert-locality-aware decode router for PD-disaggregated MoE serving. From a request's prefill expert activations, ELDR builds an expert signature predicting the experts it will activate during generation. Offline, balanced K-means partitions signature space across decode workers; online, locality-band routing sends each request to the least-loaded worker among those best matching its signature. A signature cache, co-indexed with the KV cache at KV-block granularity, keeps signatures exact under prefix caching. Implemented in vLLM and evaluated on deployments of up to 40 GPUs, ELDR reduces median TPOT by 5.9-13.9% over the strongest of four load-balancing baselines across three MoE models and two workloads, with model outputs unchanged.

Multi-turn LLM serving accumulates dialogue history whose Key-Value (KV) cache grows with every turn and every user, quickly exceeding the model weights themselves and making memory -- not compute -- the binding constraint on throughput. Non-uniform KV compression, which allocates heterogeneous budgets across attention heads, preserves accuracy far better than uniform schemes, yet remains impractical: modern serving stacks assume identical KV lengths across heads, so heterogeneity traps freed memory as page fragmentation, spends up to 25% of prefill time reclaiming scattered pages, and skews GPU workloads that inflate decode latency by up to 1.7times or burn 15--20% of each decode step on re-planning. We observe that this heterogeneity need not be discovered at runtime: head-wise retention follows a two-level structural regularity -- an input-invariant head ranking with narrowly bounded per-head ratios -- that can be calibrated offline from as few as 50 samples. Building on this insight, we present Tangram, a serving framework that statically resolves what prior systems handle dynamically: Budget Reservation fixes each head's post-compression footprint at scheduling time, eliminating page reclamation; Ragged Paging clusters similar-budget heads into independent page tables, turning fragmentation into reclaimable memory; and Ahead-of-Time Load Balancing precomputes balanced GPU partitions with zero runtime planning. Implemented on vLLM, Tangram serves as a drop-in substrate for existing non-uniform compression methods, matching their accuracy while improving end-to-end throughput by up to 2.6times over the full-KV baseline. Our implementation is publicly available at https://github.com/aiha-lab/TANGRAM.

With the widespread adoption of Large Language Models (LLMs), serving LLM inference requests has become an increasingly important task, attracting active research advancements. Practical workloads play an essential role in this process: they are critical for motivating and benchmarking serving techniques and systems. However, the existing understanding of real-world LLM serving workloads is limited due to the lack of a comprehensive workload characterization. Prior analyses remain insufficient in scale and scope, thus failing to fully capture intricate workload characteristics. In this paper, we fill the gap with an in-depth characterization of LLM serving workloads collected from our worldwide cloud inference serving service, covering not only language models but also emerging multimodal and reasoning models, and unveiling important new findings in each case. Moreover, based on our findings, we propose ServeGen, a principled framework for generating realistic LLM serving workloads by composing them on a per-client basis. A practical use case in production validates that ServeGen avoids 50% under-provisioning compared to naive workload generation, demonstrating ServeGen's advantage in performance benchmarking. We will open-source ServeGen to foster future research.

Large Language Model (LLM) serving systems remain fundamentally fragile, where frequent hardware faults in hyperscale clusters trigger disproportionate service outages in the software stack. Current recovery mechanisms are prohibitively slow, often requiring up to 10 minutes to reinitialize resources and reload massive model weights. We introduce KevlarFlow, a fault tolerant serving architecture designed to bridge the gap between hardware unreliability and service availability. KevlarFlow leverages 1) decoupled model parallelism initialization, 2) dynamic traffic rerouting, and 3) background KV cache replication to maintain high throughput during partial failures. Our evaluation demonstrates that KevlarFlow reduces mean-time-to-recovery (MTTR) by 20x and, under failure conditions, improves average latency by 3.1x, 99th percentile (p99) latency by 2.8x, average time-to-first-token (TTFT) by 378.9x, and p99 TTFT by 574.6x with negligible runtime overhead in comparison to state-of-the-art LLM serving systems.

Mixture-of-Experts (MoE) models challenge serving infrastructures with dynamic, sparse expert utilization, causing instability on conventional systems designed for dense architectures. We propose EaaS, a novel serving system to enable efficient, scalable, and robust MoE deployment. Our system disaggregates MoE modules into independent, stateless services. This design enables fine-grained resource scaling and provides inherent fault tolerance by decoupling compute units. The architecture is powered by a high-performance, CPU-free peer-to-peer communication library that ensures minimal overhead and high throughput. Experiments confirm EaaS's scalability and efficiency, achieving performance comparable to monolithic systems while providing robust fault tolerance and strong scalability. EaaS incurs less than a 2% throughput reduction under simulated hardware failures that would otherwise halt monolithic architectures. It further saves up to 37.5% of computing resources through dynamic fine-grained adaptation to serving traffic, demonstrating strong resilience for large-scale MoE deployment in production.

Mixture-of-Experts (MoE) model architecture has emerged as a promising solution for scaling transformer models efficiently, offering sparse activation that reduces computational costs while increasing model capacity. However, as MoE models scale, they need to be distributed across GPU devices, thus face critical performance bottlenecks due to their large memory footprint. Expert parallelism distributes experts across GPUs, however, faces key challenges including an unbalanced token routing and expert activation, resulting in communication tail latency and processing inefficiencies. While existing solutions address some of these issues, they fail to resolve the dual challenges of load imbalance and communication skew. The imbalance in token processing load across experts causes uneven processing times on different GPUs, while communication skew between GPUs leads to unbalanced inter-GPU data transfers. These factors degrade the performance of MoE models by increasing tail latency and reducing overall throughput. To address these limitations, we propose an Integer Linear Programming (ILP) formulation to optimize expert placement by jointly considering token load, communication, and computation costs. We exploit the property that there is a token routing dependency across layers, where tokens routed to a specific expert in one layer are likely to be routed to a limited set of experts in the subsequent layer. Our solution, MoETuner, offers an optimal expert-to-GPU assignment that minimizes inter-GPU token routing costs and balances token processing across devices, thereby reducing tail latency and end-to-end execution time. Experimental results demonstrate 9.3% and 17.5% of end-to-end speedups for single-node and multi-node inference respectively, showcasing the potential of our ILP-based optimization for offering expert parallel solutions for next-generation MoEs.

Large language model (LLM) serving infrastructures are undergoing a shift toward heterogeneity and disaggregation. Modern deployments increasingly integrate diverse accelerators and near-memory processing technologies, introducing significant hardware heterogeneity, while system software increasingly separates computation, memory, and model components across distributed resources to improve scalability and efficiency. As a result, LLM serving performance is no longer determined by hardware or software choices in isolation, but by their runtime interaction through scheduling, data movement, and interconnect behavior. However, understanding these interactions remains challenging, as existing simulators lack the ability to jointly model heterogeneous hardware and disaggregated serving techniques within a unified, runtime-driven framework. This paper presents LLMServingSim 2.0, a unified system-level simulator designed to make runtime-driven hardware-software interactions in heterogeneous and disaggregated LLM serving infrastructures explicit and analyzable. LLMServingSim 2.0 embeds serving decisions and hardware behavior into a single runtime loop, enabling interaction-aware modeling of batching, routing, offloading, memory, and power. The simulator supports extensible integration of emerging accelerators and memory systems through profile-based modeling, while capturing dynamic serving behavior and system-level effects. We validate LLMServingSim 2.0 against real deployments, showing that it reproduces key performance, memory, and power metrics with an average error of 0.95%, while maintaining simulation times of around 10 minutes even for complex configurations. These results demonstrate that LLMServingSim 2.0 provides a practical bridge between hardware innovation and serving-system design, enabling systematic exploration and co-design for next-generation LLM serving infrastructures.

Large language model (LLM) inference workload dominates a wide variety of modern AI applications, ranging from multi-turn conversation to document analysis. Balancing fairness and efficiency is critical for managing diverse client workloads with varying prefix patterns. Unfortunately, existing fair scheduling algorithms for LLM serving, such as Virtual Token Counter (VTC), fail to take prefix locality into consideration and thus suffer from poor performance. On the other hand, locality-aware scheduling algorithms in existing LLM serving frameworks tend to maximize the prefix cache hit rate without considering fair sharing among clients. This paper introduces the first locality-aware fair scheduling algorithm, Deficit Longest Prefix Match (DLPM), which can maintain a high degree of prefix locality with a fairness guarantee. We also introduce a novel algorithm, Double Deficit LPM (D^2LPM), extending DLPM for the distributed setup that can find a balance point among fairness, locality, and load-balancing. Our extensive evaluation demonstrates the superior performance of DLPM and D^2LPM in ensuring fairness while maintaining high throughput (up to 2.87times higher than VTC) and low per-client (up to 7.18times lower than state-of-the-art distributed LLM serving system) latency.

For Mixture-of-Experts (MoE) models, an unbalanced expert load will lead to routing collapse or increased computational overhead. Existing methods commonly employ an auxiliary loss to encourage load balance, but a large auxiliary loss will introduce non-negligible interference gradients into training and thus impair the model performance. In order to control load balance while not producing undesired gradients during training, we propose Loss-Free Balancing, featured by an auxiliary-loss-free load balancing strategy. To be specific, before the top-K routing decision, Loss-Free Balancing will first apply an expert-wise bias to the routing scores of each expert. By dynamically updating the bias of each expert according to its recent load, Loss-Free Balancing can consistently maintain a balanced distribution of expert load. In addition, since Loss-Free Balancing does not produce any interference gradients, it also elevates the upper bound of model performance gained from MoE training. We validate the performance of Loss-Free Balancing on MoE models with up to 3B parameters trained on up to 200B tokens. Experimental results show that Loss-Free Balancing achieves both better performance and better load balance compared with traditional auxiliary-loss-controlled load balancing strategies.

Efficiently serving Large Language Models (LLMs) requires selecting an optimal parallel execution plan, balancing computation, memory, and communication overhead. However, determining the best strategy is challenging due to varying parallelism techniques (data, pipeline, tensor) and workload characteristics (e.g., compute-intensive tasks with long prompts vs. memory-intensive tasks with long generation). We propose APEX, an LLM serving system simulator that efficiently identifies optimal parallel execution plans by considering key factors of LLM serving systems, such as memory usage, batching behavior, etc. APEX performs dynamism-aware simulation to model iteration-level batching, and leverages LLMs' repetitive structure to reduce design space, scaling efficiently to trillion-scale models. APEX abstracts the key components of LLM serving systems, including the model, batching module, quantization formats, and device clusters, enabling the simulator to be general and extensible. Simulating on a CPU, APEX evaluates execution plans for various device clusters, covering diverse LLMs and workloads. APEX finds plans up to 3.37x faster than heuristics, and also plans that reduce energy consumption by up to 45% compared to latency-optimal plans. APEX performs comprehensive evaluations, reporting key system metrics like time per output token and time to first token, which can help service providers meet SLOs. APEX identifies an optimal plan within 15 minutes on a CPU, making it 71x faster and 1234x more cost-effective than cloud-based GPU deployment. APEX can be accessed at https://github.com/microsoft/apex_plus

Apache Spark is a widely adopted framework for large-scale data processing. However, in industrial analytics environments, Spark's built-in schedulers, such as FIFO and fair scheduling, struggle to maintain both user-level fairness and low mean response time, particularly in long-running shared applications. Existing solutions typically focus on job-level fairness which unintentionally favors users who submit more jobs. Although Spark offers a built-in fair scheduler, it lacks adaptability to dynamic user workloads and may degrade overall job performance. We present the User Weighted Fair Queuing (UWFQ) scheduler, designed to minimize job response times while ensuring equitable resource distribution across users and their respective jobs. UWFQ simulates a virtual fair queuing system and schedules jobs based on their estimated finish times under a bounded fairness model. To further address task skew and reduce priority inversions, which are common in Spark workloads, we introduce runtime partitioning, a method that dynamically refines task granularity based on expected runtime. We implement UWFQ within the Spark framework and evaluate its performance using multi-user synthetic workloads and Google cluster traces. We show that UWFQ reduces the average response time of small jobs by up to 74% compared to existing built-in Spark schedulers and to state-of-the-art fair scheduling algorithms.

Serverless computing has emerged as a compelling new paradigm of cloud computing models in recent years. It promises the user services at large scale and low cost while eliminating the need for infrastructure management. On cloud provider side, flexible resource management is required to meet fluctuating demand. It can be enabled through automated provisioning and deprovisioning of resources. A common approach among both commercial and open source serverless computing platforms is workload-based auto-scaling, where a designated algorithm scales instances according to the number of incoming requests. In the recently evolving serverless framework Knative a request-based policy is proposed, where the algorithm scales resources by a configured maximum number of requests that can be processed in parallel per instance, the so-called concurrency. As we show in a baseline experiment, this predefined concurrency level can strongly influence the performance of a serverless application. However, identifying the concurrency configuration that yields the highest possible quality of service is a challenging task due to various factors, e.g. varying workload and complex infrastructure characteristics, influencing throughput and latency. While there has been considerable research into intelligent techniques for optimizing auto-scaling for virtual machine provisioning, this topic has not yet been discussed in the area of serverless computing. For this reason, we investigate the applicability of a reinforcement learning approach, which has been proven on dynamic virtual machine provisioning, to request-based auto-scaling in a serverless framework. Our results show that within a limited number of iterations our proposed model learns an effective scaling policy per workload, improving the performance compared to the default auto-scaling configuration.

Prefill-decode (PD) disaggregation has become the standard architecture for large-scale LLM serving, but in practice its deployment boundary is still determined by KVCache transfer. In conventional dense-attention models, prefill generates huge KVCache traffics that keep prefill and decode tightly coupled within a single high-bandwidth network domain, limiting heterogeneous deployment and resource elasticity. Recent hybrid-attention architectures substantially reduce KVCache size, making cross-cluster KVCache transport increasingly plausible. However, smaller KVCache alone does not make heterogeneous cross-datacenter PD serving practical: real workloads remain bursty, request lengths are highly skewed, prefix caches are unevenly distributed, and inter-cluster bandwidth fluctuates. A naive design that fully externalizes prefill can therefore still suffer from congestion, unstable queueing, and poor utilization. We present Prefill-as-a-Service (PrfaaS), a cross-datacenter serving architecture that selectively offloads long-context prefill to standalone, compute-dense prefill clusters and transfers the resulting KVCache over commodity Ethernet to local PD clusters for decode. Rather than treating reduced KVCache as sufficient, PrfaaS combines model-side KV efficiency with system-side selective offloading, bandwidth-aware scheduling, and cache-aware request placement. This design removes the requirement that heterogeneous accelerators share the same low-latency RDMA fabric, enabling independent scaling of prefill and decode capacity across loosely coupled clusters. In a case study using an internal 1T-parameter hybrid model, a PrfaaS-augmented heterogeneous deployment achieves 54% higher serving throughput and 64% lower P90 TTFT than a homogeneous PD baseline, with approximately 15% throughput gain at equal cost, while consuming only modest cross-datacenter bandwidth.

The rapid advancement of Large Language Models (LLMs) has driven the need for more efficient serving strategies. In this context, efficiency refers to the proportion of requests that meet their Service Level Objectives (SLOs), particularly for Time To First Token (TTFT) and Time Between Tokens (TBT). However, existing systems often prioritize one metric at the cost of the other. We present Ascendra, an LLM serving system designed to meet both TTFT and TBT SLOs simultaneously. The core insight behind Ascendra is that a request's urgency evolves as it approaches its deadline. To leverage this, Ascendra partitions GPU resources into two types of instances: low-priority and high-priority. Low-priority instances maximize throughput by processing requests out of arrival order, but at the risk of request starvation. To address this, Ascendra employs a performance model to predict requests at risk of missing their SLOs and proactively offloads them to high-priority instances. High-priority instances are optimized for low-latency execution and handle urgent requests nearing their deadlines. This partitioned architecture enables Ascendra to effectively balance high throughput and low latency. Extensive evaluation shows that Ascendra improves system throughput by up to 1.7x compared to vLLM and Sarathi-Serve while meeting both TTFT and TBT SLOs.

We survey the large language model (LLM) serving area to understand the intricate dynamics between cost-efficiency and accuracy, which is magnified by the growing need for longer contextual understanding when deploying models at a massive scale. Our findings reveal that works in this space optimize along three distinct but conflicting goals: improving serving context length (C), improving serving accuracy (A), and improving serving performance (P). Drawing inspiration from the CAP theorem in databases, we propose a CAP principle for LLM serving, which suggests that any optimization can improve at most two of these three goals simultaneously. Our survey categorizes existing works within this framework. We find the definition and continuity of user-perceived measurement metrics are crucial in determining whether a goal has been met, akin to prior CAP databases in the wild. We recognize the CAP principle for LLM serving as a guiding principle, rather than a formal theorem, to inform designers of the inherent and dynamic trade-offs in serving models. As serving accuracy and performance have been extensively studied, this survey focuses on works that extend serving context length and address the resulting challenges.

Large Language Models (LLMs) are increasingly deployed in both latency-sensitive online services and cost-sensitive offline workloads. Co-locating these workloads on shared serving instances can improve resource utilization, but directly applying this approach to Prefill/Decode (P/D) disaggregated systems introduces severe load imbalance, as fluctuating request mixes alter the intrinsic P/D ratio. Existing dynamic adjustment techniques cannot keep up with the bursty traffic patterns of online services. We propose a latency-constraint disaggregated architecture, which separates cluster resources into latency-strict and latency-relaxed pools based on task latency requirements. This design enables flexible placement of offline decode tasks, mitigating P/D imbalance while preserving online performance. To fully exploit this flexibility, we propose (1) a bottleneck-based scheduler guided by a Roofline-based performance model for performance bottleneck based scheduling, and (2) a fast preemption mechanism that strictly enforces Service Level Objectives (SLOs) for online requests. Experiments on real-world traces show that compared to existing offline system approaches, our method improves offline throughput by up to 3x, while maintaining online request SLOs.

Deploying multiple models within shared GPU clusters is a key strategy to improve resource efficiency in large language model (LLM) serving. Existing multi-LLM serving systems improve GPU utilization at the cost of degraded inference performance, particularly time-to-first-token (TTFT). We attribute this degradation to the lack of awareness regarding future workload characteristics. In contrast, recent analyses have shown the strong periodicity and long-term predictability of real-world LLM serving workloads. In this paper, we propose one-for-many GPU prewarming, which proactively loads parameters from multiple models onto GPUs based on workload forecasts. These prewarmed weights enable the system to promptly instantiate serving instances upon encountering request bursts. We design and implement WarmServe, a multi-LLM serving system incorporating three key techniques: (1) a model placement algorithm that optimizes prewarming decisions to minimize cross-model prewarming interference, (2) a KV cache reservation strategy that repurposes idle KV cache space on running GPUs for prewarming new models, and (3) an efficient GPU memory switching mechanism for tensor management. Evaluation on real-world datasets shows that WarmServe reduces tail TTFT by up to 50.8times compared to the state-of-the-art autoscaling-based system, while supporting up to 2.5times higher request throughput than the GPU-sharing system.

Ad-load balancing is a critical challenge in online advertising systems, particularly in the context of social media platforms, where the goal is to maximize user engagement and revenue while maintaining a satisfactory user experience. This requires the optimization of conflicting objectives, such as user satisfaction and ads revenue. Traditional approaches to ad-load balancing rely on static allocation policies, which fail to adapt to changing user preferences and contextual factors. In this paper, we present an approach that leverages off-policy learning and evaluation from logged bandit feedback. We start by presenting a motivating analysis of the ad-load balancing problem, highlighting the conflicting objectives between user satisfaction and ads revenue. We emphasize the nuances that arise due to user heterogeneity and the dependence on the user's position within a session. Based on this analysis, we define the problem as determining the optimal ad-load for a particular feed fetch. To tackle this problem, we propose an off-policy learning framework that leverages unbiased estimators such as Inverse Propensity Scoring (IPS) and Doubly Robust (DR) to learn and estimate the policy values using offline collected stochastic data. We present insights from online A/B experiments deployed at scale across over 80 million users generating over 200 million sessions, where we find statistically significant improvements in both user satisfaction metrics and ads revenue for the platform.

Motivated by the operational problems in click and collect systems, such as curbside pickup programs, we study a joint admission control and capacity allocation problem. We consider a system where arriving customers have preferred service delivery times and gauge the service quality based on the service provider's ability to complete the service as close as possible to the preferred time. Customers can be of different priority classes, and their priority may increase as they wait longer in the queue. The service provider can reject customers upon their arrival if the system is overloaded or outsource the service (alternatively work overtime) when the capacity is not enough. The service provider's goal is to find the minimum-cost admission and capacity allocation policy to dynamically decide when to serve and whom to serve. We model this problem as a Markov Decision Process. Our structural results partially characterize a set of suboptimal solutions, and we develop solution methods using these results. We also develop a problem-specific approximation method that is based on state aggregation to overcome the computational challenges. We present extensive computational results and discuss the impact of problem parameters on the optimal policy.

Realistic evaluation of LLM serving systems requires online workloads, dynamic arrivals, queueing, and the serving engine's local scheduling for execution batching, but running such experiments on GPUs is expensive. Existing simulators reduce this cost, but often operate offline or in time-warped mode, re-implement serving-engine schedulers, or require accurate operator/kernel-level latency models. We present LLM-Emu, a serving-native emulator for vLLM that preserves the production HTTP, scheduling, KV-cache, and output-processing paths while replacing only GPU forward execution with profile-sampled latency and synthetic output tokens. Tested on two different GPUs, four model variants, two model families, two attention backends, and both Poisson and bursty ShareGPT workloads, LLM-Emu closely tracks real vLLM serving behavior: TPOT and ITL stay within 4.8% absolute error, E2E latency within 5.3%, and output throughput within 1.9%; TTFT is less stable, with maximum error 10.4%, reflecting its sensitivity to admission and queue state. These results suggest that lightweight, serving-native emulation can support practical online experimentation for LLM-serving systems. LLM-Emu is open sourced at https://github.com/AKafakA/llm-emu.

This paper introduces Dodoor, an efficient randomized decentralized scheduler designed for task scheduling in modern data centers. Dodoor leverages advanced research on the weighted balls-into-bins model with b-batched setting. Unlike other decentralized schedulers that rely on real-time probing of remote servers, Dodoor makes scheduling decisions based on cached server information, which is updated in batches, to reduce communication overheads. To schedule tasks with dynamic, multidimensional resource requirements in heterogeneous cluster, Dodoor uses a novel load score to measure servers' loads for each scheduled task. This score captures the anti-affinity between servers and tasks in contrast to the commonly used heuristic of counting pending tasks to balance load. On a 101-node heterogeneous cluster, Dodoor is evaluated using two workloads: (i) simulated Azure virtual machines placements and (ii) real serverless Python functions executions in Docker. The evaluation shows that Dodoor reduces scheduling messages by 55--66% on both workloads. Dodoor can also increase throughput by up to 33.2% and 21.5%, reduce mean makespan latency by 12.1% and 7.2%, and improve tail latency by 21.9% and 24.6% across the two workloads.

Two widely adopted techniques for LLM inference serving systems today are hybrid batching and disaggregated serving. A hybrid batch combines prefill and decode tokens of different requests in the same batch to improve resource utilization and throughput at the cost of increased latency per token. In contrast, disaggregated serving decouples compute-bound prefill and bandwidth-bound decode phases to optimize for service level objectives (SLOs) at the cost of resource under-utilization and KV-cache transfer overheads. To address the limitations of these techniques, we propose RAPID-Serve: a technique to concurrently execute prefill and decode on the same GPU(s) to meet latency SLOs while maintaining high throughput and efficient resource utilization. Furthermore, we propose Adaptive Resource Management for runtime compute resource allocation, optionally leveraging CU masking (a fine-grained Compute Unit partitioning feature on AMD InstinctTM GPUs). RAPID-Serve provides up to 4.1x (average 1.7x) unconstrained throughput improvement and 32x and higher (average 4.9x) throughput improvement under SLO constraints, showing it as an effective strategy compared to the state-of-the-art approaches, particularly in resource-constrained environments.

This paper presents Block, a distributed scheduling framework designed to optimize load balancing and auto-provisioning across instances in large language model serving frameworks by leveraging contextual information from incoming requests. Unlike popular model serving systems that rely on monolithic and heuristic task schedulers, Block operates as a fully distributed, stateless, and predictive scheduling system to achieve low overhead, reliability, and scalability. It leverages the deterministic and predictable characteristics of LLM inferences, such as host configurations, response lengths, and hardware performance, to make scheduling decisions based on accurately predicted metrics. Evaluation on a 12 GPUs cluster shows that Block significantly outperforms heuristic schedulers, boosting serving capacity by up to 16.7\% and reducing P99 tail latency by up to 49.5\%. These performance gains remain consistent across diverse models, workloads and configurations. Code and data are open-sourced.

As large language models (LLMs) are increasingly deployed with highly heterogeneous workloads, chunked-prefill execution has emerged as a mainstream serving architecture. Balancing scheduling fairness and latency stability in such environments is critical; otherwise, severe head-of-line blocking and request starvation will degrade user experience. However, existing systems rely on rigid First-Come, First-Served (FCFS) policies and static token budgets, leading to fairness degradation and unpredictable latency jitter. To address these issues, we propose a fairness-aware and latency-controllable scheduling framework for chunked-prefill LLM engines. Specifically, we design a lightweight aging-based scheduling policy that dynamically calculates priorities using accumulated waiting time and remaining prefill work. Furthermore, we develop Latency-Prediction-Based Request Scheduling (LPRS) and Active Prefill Control (APC) to replace static budgets with target-time constraints and actively regulate prefill concurrency. We evaluated our scheduling framework on NVIDIA GPUs and Ascend accelerators using real-world workloads. Results show the aging policy reduces mean end-to-end latency by over 10\% compared to FCFS. Moreover, LPRS and APC significantly reduce P99 tail latency and suppress prefill fragmentation, confirming that the structural prefill control and the temporal latency constraints are fundamentally complementary. All codes have been released in Github.

Modern LLM serving is no longer homogeneous or monolithic. Production systems now combine disaggregated execution, complex parallelism, runtime optimizations, and stateful workloads such as reasoning, agents, and RL rollouts. Simulation is attractive for exploring this growing design space, yet existing simulators lack the architectural completeness and decision-grade fidelity it demands. Their monolithic-replica abstractions are ill-suited to disaggregated serving, while average-case analytical proxies can distort SLA predictions and even reverse optimization conclusions. We present Frontier, a discrete-event simulator for modern LLM inference serving. Frontier features a disaggregated abstraction. It captures the structure and dynamics of modern serving systems by modeling co-location, Prefill-Decode Disaggregation (PDD), and Attention-FFN Disaggregation (AFD) with role-specific cluster workers, incorporating key runtime optimizations (e.g., CUDA Graphs, speculative decoding) within the scheduler-batch-engine loop, and supporting stateful requests for emerging workloads. It further provides accurate and generalizable predictions of computation, communication, and memory costs across diverse serving scenarios with complex workload compositions. On 16-H800 GPU testbed, Frontier achieves an average throughput error below 4%. Compared with state-of-the-art simulators, it reduces end-to-end latency error from 44.9% to 6.4% under co-location and from 51.7% to 2.6% under disaggregation. It scales to over 1K GPUs on commodity CPUs and enables new use cases such as SLA-dependent Pareto frontier exploration, heterogeneous disaggregated allocation, agentic reasoning scheduling validation, and RL post-training reconfiguration. We release Frontier at https://github.com/NetX-lab/Frontier.

This paper presents a strategy to allocate services on a Cloud system without overloading nodes and maintaining the system stability with minimum cost. We specify an abstract model of cloud resources utilization, including multiple types of resources as well as considerations for the service migration costs. A prototype meta-heuristic load balancer is demonstrated and experimental results are presented and discussed. We also propose a novel genetic algorithm, where population is seeded with the outputs of other meta-heuristic algorithms.